For owners of a 2018 Nissan Murano, the key fob is more than just a key; it’s your gateway to convenience and security. This handy device allows you to remotely lock and unlock your doors, activate the panic alarm, and even start your vehicle from a distance if equipped. However, what happens when you need to program a new key fob or reprogram an existing one? This guide will walk you through the process of 2018 Nissan Murano Key Fob Programming, making it a straightforward task you can handle yourself.
While some procedures might suggest locating a programming button, the 2018 Nissan Murano, like many modern vehicles, uses an on-board programming sequence that doesn’t require physical buttons on the car itself for key fob registration in most standard scenarios. Let’s dive into how you can program your 2018 Nissan Murano key fob.
Step-by-Step Programming Guide for Your 2018 Nissan Murano Key Fob
This process assumes you have a working key fob and are adding or reprogramming another. If you’ve lost all your key fobs, the process may require professional assistance.
Step 1: Get Inside Your 2018 Nissan Murano
Enter your 2018 Nissan Murano and ensure all doors are closed and locked. This is crucial for initiating the programming sequence correctly.
Step 2: Key Cycling in the Ignition (for models with physical key ignition)
- Insert and Remove Key: Insert your existing, already programmed Nissan Murano key into the ignition switch and remove it quickly. Repeat this insert and remove action six times within 10 seconds.
- Open and Close Driver’s Door: After the key cycling, open and then close the driver’s side door one time.
- Key Cycling Again: Insert the key into the ignition switch again and turn it to the ‘ACC’ (Accessory) position.
Step 2: Push Start Button Sequence (for models with push-button start)
- Open and Close Driver’s Door: Ensure all doors are closed, then open and close the driver’s side door.
- Insert and Remove Key (Simulated): Press the push-start button quickly six times within 10 seconds as if you were inserting and removing a key rapidly.
- Insert Key and Turn to ACC (Simulated): Press the push-start button and hold for a few seconds to turn the ignition to the ‘ACC’ (Accessory) position.
Step 3: Programming Mode Confirmation
If you’ve successfully entered programming mode, the hazard lights should flash to confirm. If they don’t flash, repeat Step 2, ensuring you perform the steps quickly and accurately.
Step 4: Key Fob Programming
- Enter Programming Mode: Once in programming mode (hazard lights flashing), press and hold both the ‘lock’ and ‘unlock’ buttons on the key fob you want to program simultaneously for about 2 seconds.
- Confirmation Signal: The hazard lights should flash again to confirm that the key fob’s signal has been received.
- Program Additional Fobs: If you have additional key fobs to program, repeat the previous step within a short time frame (usually within a minute).
Step 5: Exit Programming Mode and Test
- Turn Ignition Off: Turn the ignition off (or press the push-start button to turn off the car completely). The hazard lights should flash one last time to indicate the programming mode has been exited.
- Test Your Key Fobs: Test all programmed key fobs to ensure they lock and unlock the doors correctly. Also, test the remote start and panic alarm functions if your key fob is equipped with these features.
Troubleshooting Common Issues
- Hazard Lights Don’t Flash: If the hazard lights don’t flash to confirm programming mode, you may need to repeat Step 2 more quickly or ensure the doors are properly closed.
- Key Fob Not Responding: If the key fob doesn’t seem to program, ensure the battery in the key fob is new and correctly installed. Also, double-check that you are pressing the ‘lock’ and ‘unlock’ buttons simultaneously and holding them for a couple of seconds during programming.
- Still Having Trouble?: If you are still experiencing difficulties with your 2018 Nissan Murano key fob programming, it may be best to consult your owner’s manual or contact a certified Nissan dealer for assistance. They have specialized equipment and expertise to handle more complex programming issues.
Conclusion
Programming your 2018 Nissan Murano key fob can be a convenient process you can often accomplish at home. By following these steps carefully, you can save time and avoid a trip to the dealership for basic key fob programming. Remember to always refer to your vehicle’s owner’s manual for the most accurate and model-specific instructions. With a bit of patience, you’ll have your new or reprogrammed key fob working in no time, keeping you securely on the road with your Nissan Murano.
