2019 Ford F-150 Key Fob Programming: A Step-by-Step Guide

So you’ve got yourself a shiny 2019 Ford F-150, and maybe you need to program a new key fob. It’s a common task, but as many Ford owners discover, the process isn’t always as straightforward as the manual suggests. One F-150 owner from Boston found this out firsthand and shared their successful method online after some frustration. If you’re struggling to program your 2019 F-150 key fob, you’re in the right place. This guide, based on real-world experience, will walk you through the process to get your new key fob working seamlessly with your truck.

Before you begin, make sure you have everything you need. This includes your 2019 Ford F-150, the two original, already-programmed key fobs that came with the vehicle, and the new, unprogrammed key fob you wish to set up. It’s crucial to have all three key fobs present and ready before starting the programming sequence.

Here are the steps to program your 2019 Ford F-150 key fob, optimized for clarity and success:

  1. Get Inside and Prepare: Enter your 2019 Ford F-150 and close all the doors. It’s recommended to lock the doors as well to ensure a smooth programming process. Gather your two working key fobs and the new key fob.

  2. Extract the Key Sticks: Locate the mechanical key sticks within each key fob and remove them. Set the key sticks aside – you won’t need them for the programming itself, and they can sometimes cause confusion during the process. Keep the key fobs separate to avoid mixing them up.

  3. Find the Key Fob Slot: The key fob programming slot is located inside your center console. For F-150 models with a center console, remove the bottom insert from the front beverage holder. You’ll find an oddly shaped slot at the bottom – this is where you will insert the key fobs for programming.

  4. First Pre-programmed Key Fob Insertion: Take one of your original, working key fobs and insert it into the slot. Ensure the LOCK button on the fob is facing downwards and the buttons are pointing towards the rear of the vehicle.

  5. Initiate Programming Sequence – First Key: Without pressing the brake pedal, press the ignition button to turn the vehicle’s electronics on (do not start the engine). Wait for 5 to 10 seconds. You should hear four chimes, which indicates the system is ready for the next step.

  6. Cycle Ignition – First Key: Press the ignition button again (still without pressing the brake pedal) to turn the electronics off.

  7. Second Pre-programmed Key Fob Insertion: Quickly remove the first key fob and, within 10 seconds, insert the second pre-programmed key fob into the slot in the same orientation as the first (LOCK button down, buttons to the rear).

  8. Initiate Programming Sequence – Second Key: Again, without pressing the brake pedal, press the ignition button. Wait for 5 to 10 seconds until you hear the four chimes.

  9. Cycle Ignition – Second Key: Press the ignition button once more (no brake pedal) to turn the electronics off.

  10. New Key Fob Insertion: Quickly remove the second pre-programmed key fob and, within 10 seconds, insert the new, unprogrammed key fob into the slot, maintaining the same orientation.

  11. Finalize Programming – New Key: Press and HOLD the ignition button. Continue holding it down until you observe the doors locking and then unlocking. You should also see the blinkers flashing. This indicates that the new key fob has been successfully programmed to your 2019 Ford F-150.

  12. Programming Success: Congratulations! Your new 2019 Ford F-150 key fob should now be programmed and fully functional. Test all the buttons to ensure everything is working as expected.

By following these steps, you should be able to program your 2019 Ford F-150 key fob even if you encountered issues with the factory manual’s instructions. Enjoy the convenience of your newly programmed key fob!

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *