Is your 2020 GMC Yukon key fob not working? Don’t worry, you’re not alone. One of the most common culprits is a dead battery. Luckily, replacing the battery in your 2020 GMC Yukon key fob is a simple task you can handle yourself with just a few readily available tools. This guide will walk you through the process step-by-step, getting you back on the road in no time.
Changing your 2020 GMC Yukon key fob battery is easier than you might think. You won’t need to visit a dealership or call a professional. In most cases, all you’ll require is a new battery and a small tool you likely already have at home.
What You’ll Need
Before you begin, gather these essential items:
- A new CR2032 battery: This is the standard battery for most GMC key fobs, including the 2020 Yukon. You can purchase these batteries at most drug stores, hardware stores, and online retailers.
- A flathead screwdriver: A small flathead screwdriver will help you gently open the key fob casing.
Step-by-Step 2020 GMC Yukon Key Fob Battery Replacement
Follow these simple steps to replace your 2020 GMC Yukon key fob battery:
-
Open the Key Fob: Locate the small slot on the side or bottom of your 2020 GMC Yukon key fob. Carefully insert the flathead screwdriver into this slot and gently twist. This should pry the two halves of the key fob casing apart. Avoid using excessive force to prevent damage.
-
Remove the Old Battery: Once the key fob is open, you’ll see the battery. Take note of which side is facing up (usually the positive side, marked with a “+”). Gently remove the old CR2032 battery. You might be able to use the flathead screwdriver to help nudge it out if needed.
-
Insert the New Battery: Place the new CR2032 battery into the battery compartment. Ensure the positive (+) side is facing the same direction as the old battery was when you removed it. This is usually facing outwards or upwards when the key fob is open.
-
Close the Key Fob: Carefully align the two halves of the 2020 GMC Yukon key fob casing and snap them back together. Press firmly until you hear a click, ensuring the case is securely closed.
Testing Your Key Fob
After replacing the battery, test your 2020 GMC Yukon key fob to ensure it’s working correctly. Try locking and unlocking your doors, starting your vehicle remotely, and using any other functions your key fob offers. In most cases, a fresh battery will solve the problem, and your key fob should be back to normal operation.
However, if your 2020 GMC Yukon key fob still isn’t working after a battery replacement, there might be a more complex issue. In such instances, it’s recommended to contact a certified mechanic or your local GMC dealership for further diagnosis and repair options. They can assess whether the problem lies within the key fob itself or your vehicle’s electronic system.
