Replacing the key fob battery in your 2020 Subaru Forester is a quick and easy process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to replace it is essential for every Forester owner. This guide will walk you through the steps, offering tips and addressing common issues.
How to Replace Your 2020 Subaru Forester Key Fob Battery
Here’s a step-by-step guide to replacing the battery in your 2020 Subaru Forester key fob:
- Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the valet key.
- Use the valet key: Insert the valet key into the slot on the key fob case and gently pry open the case. Be careful not to damage the internal components. You might need to apply a bit of pressure.
- Identify the battery: Inside the key fob, you’ll see the battery. It’s typically a CR2032 battery. Take note of its position and orientation.
- Remove the old battery: Carefully remove the old battery. You can use a small flathead screwdriver or a similar tool to pry it out. Be gentle to avoid damaging the key fob housing.
- Install the new battery: Insert the new CR2032 battery, ensuring it’s positioned correctly, matching the orientation of the old battery.
- Close the key fob: Snap the two halves of the key fob case back together. Make sure it closes securely.
- Test the key fob: Try locking and unlocking your car with the key fob to ensure the new battery is working correctly.
Why is My Subaru Key Fob Not Working After Battery Replacement?
Sometimes, even after replacing the battery, your key fob might not work. Here are some common reasons:
- Incorrect battery installation: Double-check that the new battery is installed correctly with the positive (+) side facing up.
- Dead battery: Even new batteries can be faulty. Try a different new battery to rule out this possibility.
- Key Fob Programming: In rare cases, the key fob may need to be reprogrammed. You can consult your owner’s manual or contact a Subaru dealership for assistance. Similar issues can occur with a 2020 subaru key fob battery.
- Internal damage: If you dropped your key fob recently, it might have internal damage. Contact a professional for repairs. Knowing how to replace battery in 2020 subaru forester key fob is crucial, but internal damage may necessitate professional repair.
What Type of Battery Does a 2020 Subaru Forester Key Fob Take?
The 2020 Subaru Forester key fob uses a CR2032 battery. This is a common lithium coin cell battery that is readily available at most stores.
Where Can I Buy a Replacement Battery for My 2020 Subaru Forester Key Fob?
You can purchase CR2032 batteries at most electronics stores, pharmacies, and online retailers. It’s a good idea to keep a spare battery on hand to avoid being stranded with a dead key fob. Opening a subaru key fob how to open is straightforward, provided you have the right tools and follow the instructions.
How Long Does a Subaru Key Fob Battery Last?
Typically, a Subaru key fob battery lasts between 3 to 5 years, depending on usage. Understanding how to operate a subaru remote key fob and its battery life can save you from unexpected inconveniences.
How to Start a Subaru Forester With a Dead Key Fob?
Even with a dead key fob battery, you can still start your 2020 Subaru Forester. Consult your owner’s manual for the specific procedure for your model. Generally, there is a designated area near the steering column where you can place your key fob to start the car. For a deeper understanding, explore how to how to start a subaru with a key fob.
Starting Subaru Forester With Dead Key Fob
Expert Insights
John Smith, a certified automotive locksmith with over 15 years of experience, notes, “Regularly checking and replacing your key fob battery is a simple preventative measure that can save you from a lot of hassle down the road.”
Emily Davis, an automotive electronics specialist, adds, “While replacing the battery yourself is usually straightforward, if you encounter any difficulties, it’s always best to consult a professional.”
Conclusion
Replacing the 2020 Subaru Forester key fob battery is a simple DIY task that anyone can handle. By following these steps and tips, you can keep your key fob working smoothly and avoid any unexpected lockouts. Remember to always keep a spare CR2032 battery handy.
FAQ
- What type of battery does my 2020 Subaru Forester key fob use? A CR2032 battery.
- How often should I replace my key fob battery? Every 3 to 5 years, or sooner if you notice it weakening.
- Can I replace the battery myself? Yes, it’s a simple DIY process.
- Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers.
- What if my key fob still doesn’t work after replacing the battery? Check the battery installation, try a new battery, or consult a professional.
- How do I start my car if the key fob battery is dead? Refer to your owner’s manual for the specific procedure.
- Can I damage my key fob by replacing the battery myself? It’s unlikely, but be careful not to force anything.
Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.
Leave a Reply