1999 Subaru Forester Key Fob

1999 Subaru Forester Key Fob Programming: A Comprehensive Guide

Programming a 1999 Subaru Forester key fob might seem daunting, but it’s a task you can accomplish with the right information and a bit of patience. This guide will walk you through the process, offering helpful tips and addressing common questions.

Understanding Your 1999 Subaru Forester Key Fob

Before we delve into the programming process, it’s essential to understand the type of key fob your 1999 Subaru Forester uses. This model year typically came equipped with a basic remote keyless entry system.

1999 Subaru Forester Key Fob1999 Subaru Forester Key Fob

1999 Subaru Forester Key Fob Programming Instructions

Here’s a step-by-step guide to programming your 1999 Subaru Forester key fob:

  1. Gather Your Materials: You’ll need all your existing working keys and the new key fob you want to program.
  2. Enter Programming Mode: Open the driver’s side door and leave it open throughout the programming procedure.
  3. Cycle the Ignition: Insert the key into the ignition and cycle it from the “OFF” position to the “ON” position eight times within ten seconds. End with the key in the “ON” position.
  4. Confirm Programming Mode: Listen for a chime or watch for the dome light to flash, indicating the car has entered programming mode.
  5. Program Each Key Fob: Press and hold the lock button on the first key fob you want to program. While holding the lock button, press the unlock button twice. Release both buttons. Repeat this sequence for any additional key fobs, including existing ones.
  6. Exit Programming Mode: Turn the ignition to the “OFF” position. The dome light should flash again, confirming the programming process is complete.
  7. Test Your Key Fobs: Test all programmed key fobs to ensure they function correctly.

Note: If you encounter difficulties or the programming procedure fails, consult your owner’s manual or contact a qualified automotive locksmith or dealership for assistance.

Common Issues and Troubleshooting

While programming a 1999 Subaru Forester key fob is generally straightforward, you might encounter some hiccups. Here are a few common issues and their potential solutions:

  • Programming Mode Not Engaging: Double-check that you are performing the ignition cycling procedure correctly and within the specified time frame. Ensure the driver’s side door remains open throughout the process.
  • Key Fob Not Responding: If a specific key fob doesn’t program, verify that its battery is fresh. Weak batteries can prevent successful programming.
  • Previously Programmed Key Fobs Stop Working: If existing key fobs stopped functioning after attempting to program a new one, you might need to repeat the entire process, ensuring all desired key fobs are programmed in the correct sequence.

Programming a Subaru Forester key fobProgramming a Subaru Forester key fob

When to Seek Professional Help

While DIY programming is possible, certain situations warrant seeking professional assistance:

  • Lost All Keys: If you’ve lost all your keys, programming a new key fob becomes more complex. A locksmith or dealership can cut and program a new key for your Subaru.
  • Programming Attempts Fail: After multiple attempts, if the programming procedure consistently fails, there might be an underlying issue with the vehicle’s immobilizer system or receiver.
  • Lack of Confidence: If you’re uncomfortable performing the programming yourself, don’t hesitate to contact a professional.

Key Fob Replacement and Programming Services

For reliable key fob replacement and programming services, consider reaching out to Keyfobprog. Our experienced technicians specialize in automotive key and remote services for various makes and models, including Subaru. We use advanced diagnostic tools and industry-standard procedures to ensure accurate programming and optimal functionality.

Contact Keyfobrog Today!

Phone: +1 (641) 206-8880
Office: 1326 N Houston St, Amarillo, TX 79107, USA

FAQs about 1999 Subaru Forester Key Fob Programming

Q: Can I program a used key fob to my 1999 Subaru Forester?

A: Yes, you can typically program a used key fob following the same steps outlined in this guide. However, ensure the used key fob is compatible with your specific model year and trim level.

Q: How many key fobs can I program to my Subaru at once?

A: You can usually program up to four key fobs to your 1999 Subaru Forester.

Q: What should I do if my key fob battery dies?

A: You can replace the battery yourself. Most Subaru key fobs use a standard CR2032 battery. Refer to your owner’s manual or search online for instructions on accessing and replacing the battery compartment.

Q: My key fob works intermittently. What could be wrong?

A: Intermittent key fob functionality could be due to a weak battery, interference from other electronic devices, or a problem with the key fob itself or the vehicle’s receiver.

Replacing a Subaru key fob batteryReplacing a Subaru key fob battery

Q: Can I get a replacement key fob if I lose all my keys?

A: Yes, a qualified automotive locksmith or Subaru dealership can provide replacement keys and program them to your vehicle, even if you’ve lost all your original keys.

Conclusion

Programming a 1999 Subaru Forester key fob is a manageable task that can save you time and money. By following the steps outlined in this comprehensive guide, you can successfully program your key fob and regain convenient access to your vehicle. However, remember that professional help is always available if you encounter any difficulties or need assistance. Contact Keyfobprog for all your Subaru key fob needs – we’re here to help!


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *