Replace Battery in 2016 Jeep Cherokee Key Fob

Replacing the battery in your 2016 Jeep Cherokee key fob is a quick and easy process that can save you time and money. If your key fob is acting up, a dead battery is often the culprit. This guide will walk you through the simple steps to replace the battery in your 2016 Jeep Cherokee key fob, getting you back on the road in no time.

If your 2016 Jeep Grand Cherokee key fob battery is low, you might notice some telltale signs, like reduced range or intermittent function. Don’t wait until you’re stranded; addressing the issue proactively is always the best course of action. If you find yourself in a situation where your jeep key fob has left the vehicle, knowing how to access and operate your vehicle without it is crucial. For older models, information on 2001 jeep cherokee key fob programming can also be helpful for various key fob related issues.

There are several reasons why your key fob might not be working correctly. Sometimes it’s as simple as a low battery, but other times, there could be more complex issues at play. Understanding the common problems associated with key fobs can save you time and frustration.

How to Replace the Battery in Your 2016 Jeep Cherokee Key Fob

Follow these easy steps to replace the battery in your 2016 Jeep Cherokee key fob:

Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the emergency key.
Remove the emergency key: Carefully slide the emergency key out of the key fob.
Separate the key fob halves: Using the emergency key or a small flathead screwdriver, gently pry open the key fob casing along the seam. Be careful not to damage the plastic.
Identify the battery: Inside the key fob, you’ll see the battery. Note the type of battery (usually a CR2032).
Remove the old battery: Gently pry out the old battery using your fingernail or a small flathead screwdriver. Avoid puncturing the battery.
Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing up.
Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

Replacing the Battery in a 2016 Jeep Cherokee Key Fob

For those experiencing issues with their 2016 Jeep Grand Cherokee key fob not working, this process can often resolve the problem. Regularly checking and replacing your key fob battery can prevent unexpected issues and ensure your vehicle is always accessible.

Common Problems with Jeep Cherokee Key Fobs

Sometimes, replacing the battery isn’t enough. Here are a few other common problems and their solutions:

Key Fob Not Detected: This can be due to a weak battery, a faulty key fob, or issues with the vehicle’s receiver. Try reprogramming the key fob or having it checked by a professional. If your jeep grand cherokee key fob battery low indicator is on, a battery replacement is often the solution.
Key Fob Buttons Not Working: This can indicate worn-out buttons or internal damage to the key fob. You might need to replace the entire key fob.
Key Fob Intermittently Working: This can be caused by a weak battery, interference from other electronic devices, or a loose connection within the key fob.

Troubleshooting Common Jeep Cherokee Key Fob Problems

“Regularly inspecting and replacing your key fob battery can prevent unexpected lockouts and maintain optimal performance,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair. He adds, “It’s a simple DIY task that can save you a trip to the dealership.”

Why is my 2016 Jeep Cherokee key fob not working after replacing the battery?

Sometimes, even after replacing the battery, your key fob might not work. This could be due to improper installation of the battery, a faulty new battery, or the need to reprogram the key fob.

Reprogramming a Jeep Cherokee Key Fob

“Remember to check the orientation of the new battery and ensure it’s securely placed in the compartment,” advises Sarah Jones, Electrical Systems Specialist at Jones Auto Electric.

Conclusion

Replacing the battery in your 2016 Jeep Cherokee key fob is a simple task that can be done at home with minimal tools. By following these simple steps, you can save yourself time and money. Remember to replace your key fob battery regularly to avoid unexpected issues. If your key fob is still not working after replacing the battery, it’s best to consult a qualified automotive technician. If you need help with a jeep grand cherokee 2016 key fob battery low warning, check your owner’s manual or contact a professional.

FAQ

What type of battery does the 2016 Jeep Cherokee key fob use? A CR2032 battery.
How often should I replace the battery in my key fob? Every 2-3 years, or when you notice reduced range or intermittent function.
Can I replace the battery myself? Yes, it’s a simple DIY task.
What if my key fob still doesn’t work after replacing the battery? You may need to reprogram the key fob or have it checked by a professional.
Where can I buy a replacement battery? Most hardware stores, electronics stores, and auto parts stores sell CR2032 batteries.
How do I know if my key fob battery is low? You might notice reduced range, intermittent function, or a warning light on your dashboard.
What tools do I need to replace the battery? A small flathead screwdriver or the emergency key.

Further Questions?

Have you experienced issues with your key fob after it has been left in the vehicle for an extended period? Learn more about common key fob issues on our website. We have articles addressing various Jeep models, including information on 2001 Jeep Cherokee Key Fob Programming.

Need assistance? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer support team is available 24/7.