Hyundai Elantra Key Fob Programming Instructions

Hyundai Elantra 2014 Key Fob Battery Replacement Guide

Replacing the battery in your 2014 Hyundai Elantra key fob is a simple task that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to change it is essential. This guide will walk you through the process, covering everything from identifying the right battery to troubleshooting common issues.

If your key fob is acting up, it might be time for a new battery. Symptoms of a dying 2014 Hyundai Elantra key fob battery include reduced range, intermittent operation, or the need to press the buttons multiple times. Learn more about how to change the battery on 2014 hyundai key fob in this detailed guide.

Identifying the Correct 2014 Hyundai Elantra Key Fob Battery

Before you begin, you’ll need to identify the correct battery type for your 2014 Hyundai Elantra key fob. The most common battery is a CR2032 3-volt lithium coin battery. This is readily available at most electronics stores, pharmacies, and even some grocery stores. Check your owner’s manual to confirm the correct battery type for your specific model.

You can often find affordable replacement options online as well. Make sure to choose a reputable brand for optimal performance and longevity. Learn how to change the battery on hyundai key fob with our step-by-step instructions.

Step-by-Step Guide: How to Change a 2014 Hyundai Elantra Key Fob Battery

Here’s a detailed guide on replacing your 2014 hyundai elantra key fob battery:

  1. Locate the key fob release button: This is usually a small button or switch on the side of the key fob.
  2. Release the valet key: Press the release button and slide the valet key out.
  3. Open the key fob: Use the valet key or a small flathead screwdriver to carefully pry open the key fob casing. Start at the notch where the valet key was released.
  4. Locate the battery: The battery will be a small, round, silver disc.
  5. Remove the old battery: Gently pry out the old battery using your fingernail or a small flathead screwdriver.
  6. Install the new battery: Insert the new CR2032 battery, ensuring the positive (+) side is facing up.
  7. Close the key fob: Carefully snap the two halves of the key fob back together.
  8. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

This process applies to most 2014 Hyundai Elantra models. However, slight variations may exist depending on the specific trim level. Always consult your owner’s manual if you’re unsure. You can also visit our guide about replace battery in hyundai key fob for more information.

Troubleshooting Common Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are a few common problems and their solutions:

  • Key fob still not working: Double-check that you’ve installed the correct battery type and that it’s positioned correctly.
  • Key fob works intermittently: This could indicate a faulty key fob or a problem with your car’s receiver. Consult a qualified automotive locksmith or your Hyundai dealer.

For programming your key fob for remote start, check our guide on hyundai remote start Key Fob Programming.

Hyundai Elantra Key Fob Programming InstructionsHyundai Elantra Key Fob Programming Instructions

Conclusion

Replacing the 2014 hyundai elantra key fob battery is a straightforward process that anyone can do with a little patience and the right tools. By following this guide, you can save yourself the hassle and expense of visiting a dealership or locksmith. Always prioritize safety and consult your owner’s manual for specific instructions related to your model. See our guide on 2014 hyundai elantra key fob battery.

“A dead key fob can be a major inconvenience. Knowing how to change the battery yourself empowers you to quickly resolve the issue and get back on the road,” says John Smith, Senior Automotive Technician at Keyfobprog.

FAQs

  1. What type of battery does a 2014 Hyundai Elantra key fob use? A CR2032 3-volt lithium coin battery.
  2. How long does a Hyundai Elantra key fob battery last? Typically, 3-5 years.
  3. Can I replace the battery myself? Yes, it’s a simple DIY task.
  4. What if my key fob still doesn’t work after replacing the battery? Check the battery installation or consult a professional.
  5. Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers.

“Regularly checking your key fob battery can prevent unexpected lockouts. It’s a small task with a big payoff,” adds Jane Doe, Certified Automotive Locksmith.

Other articles on our website you might find helpful: how to change battery on 2014 hyundai key fob.

Need help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *