What Battery Does a 2019 Nissan Altima Key Fob Take?

If you’re searching for “What Battery Does A 2019 Nissan Altima Key Fob Take,” you’ve come to the right place. A dead key fob battery can be a real hassle, leaving you stranded and frustrated. This guide will provide you with everything you need to know about replacing the battery in your 2019 Nissan Altima key fob, from identifying the correct battery type to step-by-step replacement instructions.

Identifying the Right Battery for Your 2019 Nissan Altima Key Fob

The 2019 Nissan Altima key fob uses a CR2032 battery. This small, circular battery is commonly used in key fobs, watches, and other small electronic devices. It’s readily available at most electronics stores, pharmacies, and online retailers. Make sure you purchase a genuine CR2032 battery from a reputable source to ensure proper performance and longevity. Using a low-quality battery could lead to a shorter lifespan and potential malfunctions.

2019 Nissan Altima Key Fob Battery – CR2032

Step-by-Step Guide to Replacing Your 2019 Nissan Altima Key Fob Battery

Replacing the battery in your 2019 Nissan Altima key fob is a simple process that you can do at home with just a few tools. Here’s a detailed guide to help you through the process:

1. Locate the release button: On the back of your key fob, you’ll find a small release button. Press this button to release the mechanical key.
2. Separate the key fob halves: Using the mechanical key or a small flathead screwdriver, carefully pry open the key fob casing. Start by inserting the key or screwdriver into the slot where the mechanical key was released. Gently twist to separate the two halves of the key fob. Be careful not to damage the casing.
3. Remove the old battery: Once the key fob is open, you’ll see the CR2032 battery. Gently pry the old battery out of its compartment using your fingernail or a small flathead screwdriver. Avoid puncturing the battery.
4. Install the new battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side is facing upwards.
5. Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
6. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Common Issues and Troubleshooting

Sometimes, even after replacing the battery, your key fob might not work. Here are a few common issues and how to troubleshoot them:

• Key fob still not working: If your key fob still isn’t working after replacing the battery, try reprogramming it. Consult your owner’s manual for specific instructions on how to reprogram your key fob.
• Key fob intermittently working: This could indicate a loose connection inside the key fob. Try opening the key fob again and ensuring the battery is securely seated in its compartment.

Troubleshooting Nissan Altima Key Fob Issues

How to Change Battery in Key Fob Nissan Quest

If you have a Nissan Quest and need help changing the key fob battery, you might find our guide on how to change battery in key fob nissan quest helpful. While the process may be different, it provides valuable insight into Nissan key fob battery replacement.

Conclusion

Knowing what battery a 2019 Nissan Altima key fob takes and how to replace it is essential for any Altima owner. This guide has provided you with the necessary information and steps to tackle this task confidently. By following these simple instructions, you can quickly and easily replace your key fob battery and avoid the inconvenience of a dead battery.

FAQ

1. What type of battery does the 2019 Nissan Altima key fob use? A CR2032 battery.
2. Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
3. How long does a CR2032 battery last in a key fob? Typically 2-3 years, depending on usage.
4. Do I need any special tools to replace the battery? A small flathead screwdriver can be helpful, but often just your fingernail will suffice.
5. What do I do if my key fob still doesn’t work after replacing the battery? Consult your owner’s manual for reprogramming instructions.
6. Can I damage my key fob by replacing the battery myself? It is possible to damage the casing if you’re not careful. Use gentle pressure when prying open the key fob.
7. Is it cheaper to replace the battery myself or have a professional do it? Replacing the battery yourself is significantly cheaper.

Need assistance with your car Key Fob Programming or need a new car key? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to help.