If you’re experiencing issues with your Subaru Ascent’s key fob, like reduced signal range or unresponsive buttons, a dead battery might be the culprit. Luckily, changing the key fob battery in a Subaru Ascent is a simple task you can do yourself at home. This guide will walk you through the process step-by-step.
What You’ll Need to Change Your Subaru Ascent Key Fob Battery
Before you get started, gather the following items:
- A new CR2032 battery (this is important, make sure it’s the right type!)
- A small flat-head screwdriver
- Your Subaru Ascent key fob
Step-by-Step Guide: Changing the Battery in Your Subaru Ascent Key Fob
Follow these easy steps to change your key fob battery:
-
Locate the release button: On the back of your Subaru Ascent key fob, find the small, round release button.
-
Release the key: Press and hold the release button while gently sliding the metal key out of the fob.
-
Open the fob: Use your fingernail or the flat-head screwdriver to carefully pry open the key fob casing. There’s a small notch where the two halves of the fob connect.
-
Remove the old battery: Inside the fob, you’ll see the CR2032 battery. Gently pry it out using the flat-head screwdriver or your fingernail. Avoid touching the battery’s flat surfaces to prevent draining its charge.
Replacing the Battery in a Subaru Ascent Key Fob -
Insert the new battery: Align the positive (+) side of the new CR2032 battery with the positive (+) marking inside the fob. Carefully press it into place.
-
Reassemble the fob: Align the two halves of the key fob casing and press them together firmly until you hear a click, indicating they’re securely closed.
-
Reinsert the key: Slide the metal key back into the fob until it locks into place.
Testing Your New Key Fob Battery
Once you’ve replaced the battery, test the key fob by pressing its buttons to ensure they’re working correctly. If everything seems good, you’re all set!
Pro Tip from John Miller, Automotive Electrician at Keyfobprog: “Remember, always use a high-quality CR2032 battery for your Subaru Ascent key fob. Cheap batteries might leak and damage the fob’s internal components.”
Still Having Trouble?
If you’ve replaced the battery and your Subaru Ascent key fob is still acting up, don’t worry! It could be a more complex issue with the fob’s programming or the car’s receiver. For expert help with your Subaru Ascent Key Fob Programming and replacement, contact the professionals at Keyfobprog at +1 (641) 206-8880 or visit our office at 1326 N Houston St, Amarillo, TX 79107, USA. We’re here to help you get back on the road with a fully functional key fob.
FAQs about Subaru Ascent Key Fob Batteries
1. How often should I change my Subaru Ascent key fob battery?
Typically, a Subaru Ascent key fob battery lasts 3-5 years, depending on usage. However, it’s a good idea to replace it sooner if you notice a decrease in its range or responsiveness.
2. Can I use any CR2032 battery for my Subaru Ascent key fob?
While any CR2032 battery will technically fit, we recommend using a reputable brand for optimal performance and longevity.
3. What happens if my Subaru Ascent key fob battery dies completely?
If your key fob battery dies, you can still unlock your car manually using the physical key hidden inside the fob. Start the car by inserting the fob into the designated slot near the steering wheel.
Starting a Subaru Ascent with a Dead Key Fob Battery
4. Do I need to reprogram my Subaru Ascent key fob after changing the battery?
No, you shouldn’t need to reprogram your Subaru Ascent key fob after a simple battery replacement. The fob should reconnect automatically.
5. My Subaru Ascent key fob is still not working after changing the battery. What should I do?
If you’re still experiencing issues, contact Keyfobprog for professional assistance. We can diagnose and fix any problems with your Subaru Ascent key fob.
Leave a Reply