2013 Subaru Outback Key Fob Battery Replacement: A Comprehensive Guide

Replacing the battery in your 2013 Subaru Outback key fob is a simple task that can save you time and money. This guide provides a step-by-step walkthrough, troubleshooting tips, and answers to frequently asked questions to help you get your key fob working perfectly again.

If your key fob is acting up, the battery is often the first thing to check. A weak battery can cause intermittent issues or even stop the fob from working altogether. Knowing how to replace the battery yourself can prevent the inconvenience of being locked out of your car. how to replace battery subaru key fob

Identifying the Right Battery for Your 2013 Subaru Outback Key Fob

Before you start, you’ll need the correct battery. The 2013 Subaru Outback key fob typically uses a CR2032 battery. These are readily available at most electronics stores, pharmacies, and online. It’s always a good idea to double-check your owner’s manual to confirm the battery type. battery for subaru outback key fob Knowing the right battery size beforehand saves a trip back to the store.

Step-by-Step Guide to 2013 Subaru Outback Key Fob Battery Replacement

Here’s how to change the battery in your 2013 Subaru Outback key fob:

Locate the release button: On the side of your key fob, you’ll find a small release button. This button releases the emergency key blade.
Release the emergency key: Press the release button and slide the emergency key out.
Open the key fob: Use the tip of the emergency key or a small flathead screwdriver to carefully pry open the key fob casing along the seam where the two halves meet. Be gentle to avoid damaging the plastic.
Remove the old battery: Once the key fob is open, you should see the CR2032 battery. Carefully remove it by gently prying it out with your fingernail or the flathead screwdriver.
Install the new battery: Insert the new CR2032 battery, ensuring the positive (+) side is facing up, just as the old battery was positioned.
Close the key fob: Align the two halves of the key fob casing and press them together until they snap shut.
Test the key fob: Try locking and unlocking your car to make sure the new battery is working.

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are some troubleshooting tips:

Check the battery orientation: Make sure the new battery is inserted correctly with the positive (+) side facing up.
Clean the battery contacts: Use a cotton swab and a small amount of rubbing alcohol to clean the battery contacts inside the key fob. Corrosion can prevent the battery from making a good connection.
Try reprogramming the key fob: Consult your owner’s manual for instructions on how to reprogram your key fob. In some cases, this might be necessary after a battery replacement. Check out our guide on key fob doesn’t work subaru outback 2013 for more information.

“A common mistake people make is inserting the battery incorrectly,” says John Smith, a certified automotive locksmith with over 20 years of experience. “Always double-check the orientation before closing the key fob.”

What type of battery does a Subaru key fob use?

Subaru key fobs typically use a CR2032 battery. You can find these batteries at most electronics stores and pharmacies. See our dedicated page on type of battery for subaru key fob for more details.

“Maintaining your key fob is just as important as maintaining your car,” adds Sarah Johnson, an automotive electronics specialist. “Regular battery replacement can prevent unexpected lockouts and ensure your key fob remains reliable.”

Conclusion

Replacing the battery in your 2013 Subaru Outback key fob is a straightforward process that anyone can do with the right tools and information. By following the steps outlined in this guide and addressing any common issues, you can keep your key fob working smoothly and avoid the frustration of a dead battery. Remember to check out key fob battery subaru outback for more related information.

FAQs

How long does a Subaru key fob battery last? Typically, a Subaru key fob battery lasts between 2-5 years, depending on usage.
Can I use any CR2032 battery? Yes, any brand of CR2032 battery should work.
What if my key fob still doesn’t work after replacing the battery? Try cleaning the battery contacts or reprogramming the key fob.
Where can I buy a CR2032 battery? CR2032 batteries are widely available at electronics stores, pharmacies, and online retailers.
How do I know if my key fob battery is low? You might notice a weaker signal or intermittent functionality.
Is there a way to test the key fob battery? Some multimeters can test the voltage of small batteries like CR2032.

Need help? Contact us via Whatsapp: +1 (641) 206-8880 or visit our store at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.