1999 Toyota Camry After Market Key Fob Programming

Programming a new key fob for your 1999 Toyota Camry can seem daunting, but with the right guidance, it can be a straightforward process. This article will cover everything you need to know about 1999 Toyota Camry After Market Key Fob Programming, from understanding the different types of key fobs available to step-by-step instructions for programming them yourself. We’ll also address common issues and troubleshooting tips, saving you time and potential frustration.

Understanding Key Fob Types for Your 1999 Toyota Camry

Before diving into programming, it’s crucial to identify the correct key fob for your 1999 Camry. There are generally two types: the basic key fob with lock, unlock, and panic buttons, and the more advanced key fob with remote start functionality. Choosing the right replacement is essential for compatibility and successful programming. Ensure you purchase a key fob that specifically states compatibility with the 1999 Toyota Camry. Using an incorrect fob can lead to programming failures.

1999 Toyota Camry Key Fob Types: Basic and Advanced

Step-by-Step Guide to 1999 Toyota Camry After Market Key Fob Programming

Here’s a general guide for programming a new key fob, but remember that specific procedures might vary slightly depending on the aftermarket key fob you choose. Always refer to the instructions provided with your specific key fob for the most accurate steps.

Gather your materials: You’ll need your new key fob, all existing working key fobs for the vehicle, and access to the driver’s side door.
Enter the vehicle: Close all doors and insert your working key into the ignition.
Cycle the ignition: Turn the key from the “OFF” position to the “ON” position (without starting the engine) six times within five seconds.
Enter programming mode: The car’s hazard lights will flash, indicating that the vehicle is in programming mode.
Program the new key fob: Press and hold the lock and unlock buttons on your new key fob simultaneously until the hazard lights flash again. This confirms the successful programming of the new fob.
Program additional fobs (if applicable): Repeat step 5 for any other key fobs you wish to program.
Exit programming mode: Remove the key from the ignition. The car’s doors should lock and unlock automatically, confirming the programming process is complete.

Common Issues and Troubleshooting

Sometimes, you might encounter problems during the programming process. Here are some common issues and solutions:

Hazard lights don’t flash: Double-check that you’re following the correct sequence and timing for cycling the ignition. Try the process again from the beginning.
New key fob doesn’t program: Make sure the battery in the new key fob is fresh. If the battery is weak, the signal might not be strong enough. Also, ensure the key fob is compatible with your 1999 Camry model.
Previously working key fobs stop functioning: If you’ve successfully programmed a new key fob but your older ones no longer work, it’s possible they’ve been inadvertently erased during the process. Repeat the programming steps for all your key fobs, including the existing ones.

Why Professional Programming Might Be Necessary

While self-programming is often possible, sometimes seeking professional assistance is the best option. If you’ve tried the steps above and are still having trouble, a qualified automotive locksmith or dealership can diagnose and resolve any underlying issues.

Professional Key Fob Programming for a 1999 Toyota Camry

“Aftermarket key fobs can sometimes be tricky to program,” says Michael Stevens, a certified automotive locksmith with over 20 years of experience. “Variations in manufacturer specifications and the specific model year of the vehicle can influence the programming process. Consulting a professional can ensure the job is done correctly the first time.”

In conclusion, programming a 1999 Toyota Camry after market key fob can be a DIY project with the right knowledge and instructions. However, don’t hesitate to seek professional help if needed. Remember to always consult your specific key fob instructions for the most accurate programming procedure.

FAQs

Can I program a used key fob to my 1999 Toyota Camry? – Yes, as long as the used key fob is compatible with your car model and has been erased from its previous vehicle.
How many key fobs can I program to my 1999 Toyota Camry? – Most 1999 Toyota Camrys can accommodate multiple key fobs.
What type of battery does my 1999 Toyota Camry key fob use? – Consult your key fob manual or a local auto parts store to determine the correct battery type.
How long does the programming process usually take? – If done correctly, the programming process should only take a few minutes.
What if my car’s hazard lights don’t flash after cycling the ignition? – Double-check your timing and try again. If it still doesn’t work, consult a professional.
Can I get a replacement key fob if I lose all my keys? – Yes, an automotive locksmith or dealership can create and program a new key fob for you, even if you’ve lost all your existing keys.
Where can I find a reliable 1999 Toyota Camry after market key fob? – Reputable online retailers, auto parts stores, and dealerships are good sources for replacement key fobs.

Other Helpful Resources on KEYFOBPROG

Programming Key Fobs for Other Toyota Models
Troubleshooting Common Key Fob Issues
Understanding Transponder Keys and Immobilizers

Need help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.