Changing the battery in your 2013 Chrysler 300 key fob is a simple process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to replace it yourself is a valuable skill. This guide will walk you through the steps involved in changing the key fob battery for your 2013 Chrysler 300, ensuring you’re back on the road in no time.
Similar to the issues discussed in 2013 chrysler 200 key fob does not work, a dead battery is the most common reason for key fob malfunction. Let’s dive into the process.
What Tools Do I Need to Change the Key Fob Battery?
You’ll need only a few simple tools: a small flathead screwdriver or a similar prying tool, and of course, a new CR2032 battery. These batteries are readily available at most stores.
Step-by-Step Guide: Replacing Your 2013 Chrysler 300 Key Fob Battery
- Locate the Key Release: On the side of your key fob, you’ll find a small button or slot. This is the key release.
- Release the Emergency Key: Press the key release and slide the metal emergency key out of the fob.
- Open the Key Fob: Use the tip of your flathead screwdriver to carefully pry open the key fob casing. Start by inserting the screwdriver into the slot where the emergency key was located. Gently twist the screwdriver to separate the two halves of the fob. Be careful not to damage the plastic.
- Remove the Old Battery: Once the fob is open, you’ll see the CR2032 battery. Gently pry it out using your screwdriver.
- Install the New Battery: Place the new CR2032 battery into the fob, ensuring the positive (+) side is facing upwards, just as the old battery was positioned.
- Close the Key Fob: Align the two halves of the key fob and press them together until they snap shut.
- Reinsert the Emergency Key: Slide the emergency key back into its slot.
- Test the Key Fob: Try locking and unlocking your car to ensure the new battery is working correctly.
Common Issues When Changing a Key Fob Battery
Sometimes, even after replacing the battery, your key fob might not work. This could be due to a few reasons:
- Incorrect Battery Installation: Ensure the battery is installed correctly, with the positive (+) side facing up.
- Damaged Key Fob: If the key fob was damaged during the process, it might need to be replaced.
- Programming Issues: In rare cases, the key fob might need to be reprogrammed.
This is similar to the issues faced by owners of the 2012 Chrysler, as detailed in 2012 chrysler key fob not working.
Correct battery orientation in a Chrysler 300 key fob
If you encounter these or any problems, contacting a professional locksmith or car dealership is always a good idea.
How Long Does a Chrysler 300 Key Fob Battery Last?
Typically, a Chrysler 300 key fob battery lasts between 3 to 5 years. However, this can vary depending on usage and environmental factors.
Just like with the 2010 chrysler town and country key fob won’t unlock situation, a weak battery can cause intermittent issues. Replacing it proactively can prevent future inconveniences.
CR2032 battery commonly used in key fobs
Tips for Maintaining Your Key Fob
- Avoid dropping your key fob frequently, as this can damage the internal components.
- Keep the key fob away from extreme temperatures.
This issue resonates with the 2018 chrysler town and country key fob not working scenarios where physical damage can impact functionality.
Example of a damaged key fob
Conclusion
Changing the battery in your 2013 Chrysler 300 key fob is a straightforward task that anyone can do with the right tools and instructions. By following the steps outlined in this guide, you can save yourself the hassle and expense of visiting a locksmith or dealership. Remember to have a new CR2032 battery on hand and be careful when prying open the fob casing. Knowing how to change the battery in your key fob 2013 Chrysler 300 can keep you prepared for the unexpected.
For further information on similar Chrysler models, you can refer to our guide on how to change battery in 2017 chrysler key fob.
Need help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.
Leave a Reply