Key Fob Battery Dodge Durango 2017: A Comprehensive Guide

If your key fob battery for your 2017 Dodge Durango is dying, you’re not alone. This is a common issue, and thankfully, replacing the Key Fob Battery Dodge Durango 2017 is a relatively simple process. This guide will walk you through everything you need to know, from identifying the signs of a dying battery to programming your new key fob.

Signs Your Key Fob Battery Needs Replacing

Several telltale signs indicate your 2017 Dodge Durango key fob battery is nearing its end. Recognizing these early can save you from the frustration of a non-responsive key fob. These include:

Reduced range: You need to be much closer to your vehicle for the key fob to work.
Intermittent function: The key fob works sometimes, but not others.
Dim or no indicator light: The LED light on your key fob is faint or doesn’t illuminate when you press a button.
Slow response: The vehicle takes longer than usual to respond to key fob commands.
Having to use the physical key: You find yourself relying on the physical key to unlock your doors more often.

If you’re experiencing any of these symptoms, it’s highly likely you need a new key fob battery.

Dodge Durango 2017 Key Fob Range Issues

What Battery Does a 2017 Dodge Durango Key Fob Take?

The 2017 Dodge Durango key fob uses a CR2032 battery. These are readily available at most stores that sell batteries, like electronics stores, pharmacies, and even some grocery stores. They’re also inexpensive, so replacing your key fob battery won’t break the bank.

How to Change Your 2017 Dodge Durango Key Fob Battery

Replacing the battery in your 2017 Dodge Durango key fob is straightforward and can be done in just a few minutes with a few simple tools. Here’s a step-by-step guide:

Locate the release slot: On the side of your key fob, there’s a small release slot.
Insert a small flathead screwdriver: Carefully insert the screwdriver into the release slot and gently pry open the key fob casing. Avoid using excessive force to prevent damage.
Separate the key fob halves: Once the casing is open, gently separate the two halves of the key fob.
Remove the old battery: Identify the CR2032 battery and carefully remove it. You may need to use your screwdriver to gently pry it out.
Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side faces up.
Reassemble the key fob: Align the two halves of the key fob and snap them back together. Ensure they fit snugly.
Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

Replacing Dodge Durango 2017 Key Fob Battery

Key Fob Programming for 2017 Dodge Durango

In most cases, you won’t need to program your key fob after replacing the battery. However, if your key fob still isn’t working correctly, you might need to reprogram it. Consult your owner’s manual for specific instructions on how to program your key fob, as the process can vary.

Troubleshooting Key Fob Issues

If you’ve replaced the battery and your key fob still isn’t working, there are a few other things you can check:

Check the battery contacts: Make sure the battery contacts inside the key fob are clean and free of corrosion.
Try a different battery: Sometimes, a new battery can be faulty. Try installing a different CR2032 battery to rule this out.
Check for other interference: Electronic devices or other key fobs can sometimes interfere with the signal.
Consult a professional: If you’ve tried all of these steps and your key fob is still not working, it’s best to consult a qualified automotive locksmith or dealership.

Conclusion

Replacing the key fob battery dodge durango 2017 is a simple and affordable process that can save you time and frustration. By following the steps outlined in this guide, you should be able to replace your key fob battery quickly and easily. Remember to keep spare CR2032 batteries on hand so you’re always prepared.

FAQs

How long does a Dodge Durango key fob battery last? Typically, a key fob battery lasts between 3-5 years.
Can I use any CR2032 battery? Yes, any brand of CR2032 battery should work.
Do I need to program the key fob after replacing the battery? Usually, no. However, refer to your owner’s manual for confirmation.
What if my key fob still doesn’t work after replacing the battery? Check the battery contacts, try a different battery, or consult a professional.
Where can I buy a CR2032 battery? Most stores that sell batteries, like electronics stores, pharmacies, and some grocery stores, carry them.
Can I damage my key fob by replacing the battery myself? It’s unlikely, but be gentle to avoid breaking any internal components.
Is there a way to test the key fob battery without replacing it? Not really, but the symptoms described earlier are strong indicators of a low battery.

Other helpful resources on KEYFOBPROG:

Key Fob Programming Guide for various car models
Troubleshooting Common Key Fob Issues
Understanding Your Car’s Immobilizer System

For further assistance, please contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.