How to Put a Subaru Key Fob Back Together

Putting your Subaru key fob back together after replacing the battery or performing other maintenance can sometimes be a bit tricky. This guide provides a step-by-step approach to reassembling your Subaru key fob, covering various models and common issues encountered during the process. Whether you’re a car owner, a mechanic, or an automotive technician, this comprehensive guide will equip you with the knowledge to handle your Subaru key fob reassembly with confidence.

Understanding the intricacies of your Subaru key fob is crucial for proper reassembly. While the process might seem straightforward, slight variations exist between models, and overlooking a small detail can lead to malfunction. This guide will address these nuances, providing clear instructions and helpful tips for a seamless reassembly.

Common Issues When Reassembling a Subaru Key Fob

One common issue is misaligning the two halves of the key fob casing. Ensure the buttons and internal components are correctly positioned before applying pressure to close the fob. Another frequent problem is trapping the key ring loop. Be mindful of its placement to avoid obstructing the closure. Forcing the two halves together can damage the key fob’s internal electronics. Gentle, even pressure is key to a successful reassembly.

Step-by-Step Guide to Reassembling Your Subaru Key Fob

1. Inspect the Key Fob Components: Before starting, ensure all parts are present and undamaged. This includes the two halves of the casing, the circuit board, the battery, and the key ring loop.
2. Position the Circuit Board: Carefully place the circuit board into the designated slot within one half of the casing. Ensure it sits flush and securely.
3. Insert the Battery: Insert the battery into its compartment, observing the correct polarity as indicated on the casing or circuit board.
4. Align the Key Ring Loop: Place the key ring loop in its proper position. This is often a small notch or groove on the edge of the casing. This step is crucial to prevent interference when closing the fob. Similar to how to open a subaru forester key fob, paying attention to small details can save you from future headaches.
5. Join the Two Halves: Carefully align the two halves of the casing. Ensure the buttons on the circuit board correspond with the button openings on the casing.
6. Apply Gentle Pressure: Apply gentle, even pressure around the edges of the casing until the two halves snap together securely. Avoid using excessive force, which could damage the fob. This is especially important for models like the Outback. For specific battery instructions related to this model, see our guide on how to change key fob battery subaru outback.

Subaru Key Fob Reassembly: Correct Alignment

Troubleshooting Common Subaru Key Fob Reassembly Problems

• Key Fob Won’t Close: If the two halves don’t snap together easily, double-check the alignment of the circuit board, battery, and key ring loop. Something might be slightly out of place.
• Buttons Don’t Work: If the buttons don’t function after reassembly, ensure the battery is inserted correctly and that the circuit board is making proper contact. You can find more information on specific key fob batteries, such as the 2015 subaru wrx key fob battery, on our website.
• Key Fob Feels Loose: If the key fob feels loose or rattles after reassembly, it’s possible the two halves aren’t fully snapped together or a component is misaligned.

Tips for Successful Subaru Key Fob Reassembly

• Work in a Clean, Well-Lit Area: This helps prevent losing small components and ensures proper visibility.
• Use a Small Screwdriver (If Necessary): Some models might require a small flathead screwdriver to gently pry open the casing or to help align components during reassembly.
• Refer to Your Owner’s Manual: Your Subaru owner’s manual might contain specific instructions or diagrams for your key fob model. This can be particularly helpful if you experience a low battery situation like described in our subaru outback key fob battery low article.

Expert Insight from John Smith, Senior Automotive Electrician: “Taking your time and paying attention to detail is crucial during key fob reassembly. Rushing the process can lead to damage and frustration.”

Expert Insight from Jane Doe, Certified Automotive Technician: “Always double-check the battery placement and polarity. An incorrectly inserted battery can prevent the key fob from functioning correctly.”

Conclusion

Reassembling your Subaru key fob can be a straightforward process when approached with care and attention. By following these step-by-step instructions and troubleshooting tips, you can successfully put your key fob back together and avoid common issues. Remember to check out our article on the battery for 2020 subaru forester key fob for more specific information.

Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to help.