2020 Toyota Highlander Key Fob Battery Size

Knowing the correct 2020 Toyota Highlander Key Fob Battery Size is crucial for maintaining effortless access to your vehicle. A dead key fob battery can leave you stranded, so understanding how to identify, replace, and even program a new battery is essential for every Highlander owner. This guide will walk you through everything you need to know about your 2020 Toyota Highlander key fob battery, from the correct size to step-by-step replacement instructions.

Identifying the Right 2020 Toyota Highlander Key Fob Battery

The 2020 Toyota Highlander uses a CR2032 battery for its key fob. This small, circular battery is widely available at most electronics stores, pharmacies, and even supermarkets. Don’t confuse it with similar-looking batteries like the CR2016 or CR2025 – using the wrong size can damage your key fob. Always double-check the markings on your current battery and ensure you purchase the correct CR2032 replacement.

What tools do I need to change my key fob battery?

Replacing your key fob battery is a quick and easy process. You’ll need a small flat-head screwdriver or a similar tool to pry open the key fob casing. Some key fobs have a designated notch or slot for easier opening.

Step-by-Step Guide to Replacing Your 2020 Toyota Highlander Key Fob Battery

  1. Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the metal emergency key.
  2. Separate the key fob halves: Use the emergency key or a flat-head screwdriver to carefully pry open the key fob casing. Start at the notch or seam where the two halves join. Be gentle to avoid breaking the casing.
  3. Identify and remove the old battery: Once open, you’ll see the CR2032 battery. Carefully remove it by gently prying it out with your screwdriver or fingernail. Note the orientation of the battery for correct replacement.
  4. Install the new battery: Insert the new CR2032 battery into the compartment, ensuring it sits correctly and matches the orientation of the old battery. Press it down firmly until it’s secure.
  5. Reassemble the key fob: Align the two halves of the key fob casing and press them together until they snap shut.
  6. Test the key fob: Try locking and unlocking your Highlander to ensure the new battery is working correctly.

Why is my 2020 Toyota Highlander key fob not working after battery replacement?

Sometimes, even after replacing the battery, your key fob might not function as expected. This could be due to a few reasons: improper installation, a faulty new battery, or a need to reprogram the key fob.

How to Reprogram Your 2020 Toyota Highlander Key Fob

While not always necessary, sometimes you might need to reprogram your key fob after a battery change. Consult your owner’s manual for the specific reprogramming procedure for your 2020 Toyota Highlander model. Alternatively, a qualified automotive locksmith or dealership can assist you with this process.

Common Issues and Troubleshooting Tips

  • Key fob not working at all: Check the battery installation. Ensure it’s the correct size (CR2032) and positioned correctly. Try a new battery. If the problem persists, reprogramming may be required.
  • Intermittent key fob operation: This could indicate a weak battery or a problem with the key fob’s internal circuitry. Replace the battery first. If the issue continues, consider having the key fob inspected by a professional.
  • Key fob works intermittently only at close range: This usually indicates a weakening battery. Replace the battery as soon as possible.

“A common mistake people make is using the wrong battery size,” says John Smith, a certified automotive locksmith with over 20 years of experience. “Always double-check that you’re using a CR2032 battery for your 2020 Toyota Highlander.”

“Regularly checking and replacing your key fob battery can prevent inconvenient lockouts,” adds Sarah Jones, an automotive technician specialized in key fob programming and diagnostics. “It’s a simple preventative measure that can save you time and hassle in the long run.”

Conclusion

Keeping your 2020 Toyota Highlander key fob functioning correctly is a simple matter of knowing the right battery size (CR2032) and how to replace it. By following the steps outlined in this guide, you can easily maintain access to your vehicle and avoid frustrating lockouts. If you encounter any issues, remember that professional assistance is always available.

FAQ

  1. What size battery does a 2020 Toyota Highlander key fob take? A CR2032 battery.
  2. How do I change the battery in my 2020 Toyota Highlander key fob? Follow the step-by-step instructions in this guide or consult your owner’s manual.
  3. Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and supermarkets.
  4. Do I need to reprogram my key fob after changing the battery? Not always, but sometimes it’s necessary. Refer to your owner’s manual.
  5. What should I do if my key fob still doesn’t work after replacing the battery? Check the battery installation or consider professional assistance.
  6. How often should I change my key fob battery? Every 2-3 years or when you notice a decrease in its range.
  7. Can I replace the key fob battery myself? Yes, it’s a simple DIY task.

Other helpful articles on KEYFOBPROG:

  • Key Fob Programming for Different Car Makes and Models
  • Troubleshooting Common Key Fob Issues
  • Understanding Keyless Entry Systems

Need Help? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *