Replacing the battery in your 2017 Subaru key fob is a simple task that can save you time and money. This guide provides step-by-step instructions and helpful tips to make the process smooth and efficient. Whether you’re a car owner, a mechanic, or an automotive technician, understanding this process can be beneficial.
Why is My 2017 Subaru Key Fob Not Working?
Several reasons can cause your 2017 Subaru key fob to malfunction. A dead battery is the most common culprit. Other issues might include a faulty key fob, programming problems, or even interference from other electronic devices. This guide focuses on battery replacement, the easiest fix for most key fob issues. Knowing how to identify a dead battery will save you a trip to the dealership. Common signs include decreased range, intermittent functionality, or the key fob not working at all.
How Do I Know My Key Fob Battery Needs Replacing?
The most obvious sign is that your key fob isn’t working. If you have to be unusually close to your car for the key fob to function, or if it works intermittently, then the battery is likely dying. Sometimes, you may see a warning light on your dashboard indicating a low key fob battery.
Short answer: Your key fob works intermittently or not at all.
How to Replace the Battery in a 2017 Subaru Key Fob
Replacing the battery is a quick process that requires only a few tools. Here’s a detailed step-by-step guide:
- Gather your tools: You will need a small flathead screwdriver or a similar tool to pry open the key fob casing and a new CR2032 battery.
- Locate the release slot: On the side of your Subaru key fob, you’ll find a small release slot or button.
- Open the key fob: Insert the flathead screwdriver into the release slot and gently pry open the key fob casing. Be careful not to damage the plastic.
- Identify the battery: Inside the key fob, you’ll see the CR2032 battery. Note its position.
- Remove the old battery: Carefully pry out the old battery using the screwdriver. Avoid puncturing the battery.
- Install the new battery: Place the new CR2032 battery into the compartment, ensuring it’s oriented correctly. Press down gently until it clicks into place.
- Close the key fob: Align the two halves of the key fob casing and press them together until they snap shut.
- Test the key fob: Try locking and unlocking your car and starting the engine to ensure the new battery is working.
2017 Subaru Key Fob Battery Replacement Steps
What Type of Battery Does a 2017 Subaru Key Fob Use?
2017 Subaru key fobs use a CR2032 battery, a common type readily available at most stores. You can find them at electronics stores, pharmacies, and even some grocery stores. It’s a good idea to keep a spare on hand.
Short answer: CR2032.
Where Can I Buy a CR2032 Battery?
CR2032 batteries are widely available. You can purchase them at most electronics stores, pharmacies, supermarkets, and online retailers. For added convenience, you might consider ordering a multi-pack online.
CR2032 Battery for Subaru Key Fob
How to Program a 2017 Subaru Key Fob
In most cases, replacing the battery doesn’t require reprogramming. However, if your key fob still isn’t working after replacing the battery, you might need to reprogram it. Check your owner’s manual for specific instructions or contact your dealership or a qualified automotive technician for assistance. For specific information on the 2017 Subaru Outback, see our guide on 2017 subaru outback key fob battery replacement.
Do I Need to Reprogram My Key Fob After Replacing the Battery?
Usually, no. Replacing the battery is a simple swap, and the key fob should function normally afterwards. However, in rare instances, reprogramming might be necessary. If your key fob still doesn’t work, it might be a problem other than the battery, such as a need to how to program subaru outback 2017 key fob.
Short answer: Typically, no reprogramming is needed.
Tips and Tricks for 2017 Subaru Key Fob Battery Replacement
- Be gentle when prying open the key fob to avoid damaging the casing.
- Ensure the new battery is installed correctly, matching the orientation of the old battery.
- Consider purchasing a 2017 subaru outback key fob cover to protect your key fob from scratches and damage.
- If you’re uncomfortable performing the replacement yourself, a local locksmith or dealership can assist you. You can also consider replacing your subaru forester 2017 key fob battery. This requires similar steps as other Subaru models. Another option you may consider is to change battery subaru outback key fob.
Conclusion
Replacing the battery in your 2017 Subaru key fob is a simple and inexpensive process. By following this guide, you can save yourself the hassle and expense of a trip to the dealership. Remember to have the correct CR2032 battery on hand and be gentle when handling your key fob. This guide applies to most 2017 Subaru models, ensuring a smooth process for a 2017 Subaru Key Fob Battery Replacement.
FAQs
- How long does a Subaru key fob battery last? Typically, a Subaru key fob battery lasts between 2 and 5 years, depending on usage.
- Can I replace the key fob battery myself? Yes, it’s a simple DIY task that most people can do at home.
- What if my key fob still doesn’t work after replacing the battery? Try reprogramming the key fob or contact a professional for assistance.
- Where can I find instructions for programming my key fob? Refer to your owner’s manual or contact your dealership.
- What kind of screwdriver do I need? A small flathead screwdriver or a similar tool is usually sufficient.
- Is it expensive to replace a key fob battery? No, CR2032 batteries are relatively inexpensive and readily available.
- Can I damage my key fob during battery replacement? Yes, if you are not careful. Be gentle when prying open the case.
For further assistance, please contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to help you.
Leave a Reply