Replacing the battery in your 2016 Hyundai Elantra key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved, from identifying the correct battery type to programming your key fob after the battery replacement. We’ll also cover common issues and solutions, ensuring you’re back on the road with a fully functioning key fob in no time.
Identifying the Right Battery for Your 2016 Hyundai Elantra Key Fob
The 2016 Hyundai Elantra key fob typically uses a CR2032 battery. This is a common type of lithium coin cell battery readily available at most stores that sell batteries. Before you start, it’s always a good idea to double-check your owner’s manual to confirm the specific battery type for your Elantra model. Using the incorrect battery can damage your key fob.
How to Change Your Hyundai Elantra 2016 Key Fob Battery
Replacing the battery is straightforward. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob casing. Locate the small notch or slot on the side of the key fob. Carefully insert the flathead screwdriver into the notch and gently twist to separate the two halves of the fob. Once open, you’ll see the CR2032 battery. Carefully remove the old battery and replace it with the new one, ensuring the positive (+) side is facing up. Finally, snap the two halves of the key fob back together.
Programming Your Hyundai Elantra 2016 Key Fob After Battery Replacement
In most cases, your 2016 Hyundai Elantra key fob should function normally after a battery replacement without requiring reprogramming. However, if you experience any issues with the key fob’s functionality, such as the remote lock/unlock or panic button not working, you may need to reprogram it. You can often find the reprogramming instructions in your owner’s manual. The procedure usually involves a specific sequence of button presses or using the ignition key. If you’re unsure, consulting a professional locksmith or your Hyundai dealership is recommended. For further details on programming Hyundai key fobs, you can visit our guide on hyundai remote start key fob programming.
Troubleshooting Common Key Fob Issues
Sometimes, even after replacing the battery, your key fob might not work. Here are some common problems and their solutions:
-
Key fob not working at all: Try replacing the battery again with a fresh CR2032 battery. Ensure it is inserted correctly with the positive side facing up. If this doesn’t work, the key fob itself may be faulty and need replacing. You might find our page on hyundai elantra 2016 key fob replacement helpful.
-
Intermittent key fob function: This could indicate a weak battery or a loose connection inside the key fob. Check the battery contacts for corrosion and clean them if necessary. If the problem persists, consider replacing the key fob.
-
Key fob works intermittently at close range: This could indicate a weak battery or an issue with the key fob’s antenna. Try replacing the battery. If the problem continues, you may need a new key fob.
Hyundai Elantra Key Fob Troubleshooting Guide
Why is my Hyundai Elantra 2016 key fob not working after battery change?
Even with a new battery, your key fob might not function due to several reasons. These include incorrect battery installation, a need for reprogramming, internal key fob damage, or even issues with your car’s receiver.
How do I know if my Hyundai Elantra key fob needs a new battery?
Common signs include reduced remote range, requiring multiple button presses for response, or the key fob not working at all. Dimming or lack of indicator lights on the fob can also indicate a low battery. Similar issues can occur with other models, and you can learn about them in our guide about 2024 hyundai elantra sel key fob.
Testing the Hyundai Elantra Key Fob Battery
How long does a Hyundai Elantra key fob battery last?
Typically, a Hyundai Elantra key fob battery lasts between 3-5 years, depending on usage. Frequent use or extreme temperatures can shorten battery life. Just like programming a 2016 Elantra key fob, you can find relevant information for other models. Check out our guide on program key fob 2016 hyundai elantra for more information.
Conclusion
Replacing your 2016 Hyundai Elantra key fob battery is a simple DIY task. With this guide, you can easily change the battery and troubleshoot common issues. Remember to always use the correct battery type and consult your owner’s manual or a professional if needed.
FAQ
- What type of battery does a 2016 Hyundai Elantra key fob use? A CR2032 battery.
- Do I need to reprogram my key fob after changing the battery? Usually not, but you might need to if the key fob malfunctions.
- Where can I buy a replacement CR2032 battery? Most stores selling batteries carry them.
- How long does a Hyundai Elantra key fob battery last? Typically 3-5 years.
- What if my key fob still doesn’t work after replacing the battery? Check the battery installation, try reprogramming, or consider replacing the key fob.
- What tools do I need to change the key fob battery? A small flathead screwdriver or similar tool.
- How do I know if my key fob battery is low? Reduced range, unresponsive buttons, or no lights on the fob are indicators.
Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit our store at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to help.
Leave a Reply