Changing Battery in GMC Sierra Key Fob

Replacing the battery in your GMC Sierra key fob is a quick and easy process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to change it yourself is essential. This guide will walk you through the steps for various GMC Sierra models, offering tips and addressing common issues.

How to Change Your GMC Sierra Key Fob Battery

First, identify your GMC Sierra key fob type. Different models and years may have slightly different fob designs. Knowing your specific key fob will make finding the correct battery and following the right procedure much simpler. Different GMC Sierra Key Fob Types

Next, gather your tools. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob casing. Some fobs may require a specific size screwdriver, so consult your owner’s manual for details. You’ll also need the correct replacement battery. The most common battery type is a CR2032, but it’s always best to double-check your owner’s manual to ensure you purchase the right one. Having the right tools and battery ready will streamline the process.

Now, carefully open the key fob. Locate the small notch or seam on the side of the fob. Gently insert the flathead screwdriver into the notch and pry open the casing. Be careful not to damage the plastic. Opening the GMC Sierra Key Fob Casing For some models, you may need to separate the key blade from the fob before opening it. See your owner’s manual for instructions specific to your model. Just like change battery 2015 gmc yukon key fob, the process requires attention to detail.

Once open, locate the old battery. It should be easily visible inside the casing. Note the orientation of the battery, positive (+) side up or down. Using your screwdriver or fingernail, carefully remove the old battery. Avoid touching the battery terminals.

Install the new battery, ensuring it’s in the same orientation as the old one. Press it firmly into place. Then, close the key fob casing by snapping the two halves back together. Test the key fob by locking and unlocking your vehicle. If it doesn’t work, double-check the battery installation and ensure the casing is fully closed.

Common Issues and Troubleshooting

Sometimes, even after changing the battery, the key fob might not work. This could be due to a few reasons:

• Incorrect battery installation: Ensure the battery is installed correctly with the positive and negative terminals in the right position.
• Damaged key fob: If the key fob was dropped or damaged, internal components could be faulty.
• Programming issues: In some cases, you may need to reprogram the key fob after changing the battery. Refer to your owner’s manual or contact a qualified technician for assistance with reprogramming. Similar to how to program key fob for 2000 gmc sierra, programming can sometimes be required.

Why Change the Battery Yourself?

Changing the key fob battery yourself is a cost-effective and time-saving solution. Dealerships and auto shops can charge a significant amount for this simple task. By following these steps, you can avoid those unnecessary expenses.

What type of battery does a GMC Sierra key fob use?

Most GMC Sierra key fobs use a CR2032 battery. This is a common type of lithium coin cell battery.

How long does a GMC Sierra key fob battery last?

The lifespan of a GMC Sierra key fob battery typically ranges from 3 to 5 years.

Installing New Battery in GMC Sierra Key Fob

When should I change my GMC Sierra key fob battery?

You should change your key fob battery when you notice the range decreasing or the key fob becoming less responsive. Don’t wait until it stops working completely. Knowing the 2023 gmc key fob functions can help you identify when the battery is weakening.

How do I know if my GMC Sierra key fob needs a new battery?

Signs of a dying key fob battery include decreased range, intermittent operation, or the need to press the buttons multiple times. Similar issues can be observed with the 2018 gmc sierra key fob, so understanding these signs is crucial.

Conclusion

Changing the battery in your GMC Sierra key fob is a simple task that anyone can do with the right tools and a little patience. By following these instructions, you can save yourself time and money. If you experience any issues, refer to your owner’s manual or contact a qualified technician.

Closed GMC Sierra Key Fob

FAQs

1. What type of battery does my GMC Sierra key fob use? Most GMC Sierra key fobs use a CR2032 battery.
2. How often should I change the battery? Every 3-5 years, or sooner if you notice reduced range.
3. Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers carry CR2032 batteries.
4. Do I need to reprogram my key fob after changing the battery? Usually not, but consult your owner’s manual just in case.
5. What if my key fob still doesn’t work after changing the battery? Check the battery installation or contact a qualified technician.
6. Can I damage my key fob by changing the battery myself? It’s possible if you’re not careful, so proceed gently.
7. Is there a special tool I need to open the key fob? A small flathead screwdriver usually works, but check your owner’s manual.

For further information on GMC key fob related topics, explore resources on programming GMC Sierra key fobs, understanding GMC key fob functionalities, and troubleshooting common GMC key fob issues. This information will provide a comprehensive overview and assist you in maintaining your GMC Sierra’s key fob.

Need more help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.