Lost your key fob or need to program a new one for your 2004 GMC Envoy? Programming your key fob yourself can save you time and money. Follow these straightforward steps to program your 2004 Gmc Envoy Key Fob quickly and get back on the road with full remote access.
Step-by-Step Guide to Program Your 2004 GMC Envoy Key Fob
This guide provides clear instructions to program your 2004 GMC Envoy key fob remote. Ensure you follow each step precisely for successful programming.
-
Ensure Doors Are Closed: Begin by closing all doors of your 2004 GMC Envoy. This is crucial for initiating the programming sequence.
-
Insert Key into Ignition: Insert your key into the ignition. Do not turn the ignition on at this stage.
-
Press and Hold UNLOCK Button: Locate the power UNLOCK button on the driver’s side door panel. Press and hold this button down. Maintain pressure on the UNLOCK button until step 9 instructs you to release it.
-
Rapid Ignition Sequence – Steps 5 through 8: Perform the following steps in quick succession:
-
Turn Ignition to ON Position: Turn the ignition key to the ON position. This is the position right before starting the engine. The dash lights should illuminate.
-
Turn Ignition to OFF Position: Immediately turn the ignition key back to the OFF position.
-
Turn Ignition to ON Position Again: Turn the ignition key to the ON position once more, as in step 5.
-
Turn Ignition to OFF Position Again: Turn the ignition key back to the OFF position for the final time in this sequence.
-
Release UNLOCK Button: Release the power UNLOCK button on the door panel. Listen for the vehicle to respond by automatically cycling the door locks, locking and then unlocking. This lock cycling indicates that your 2004 GMC Envoy has successfully entered programming mode. If the locks do not cycle, remove the key, open the driver’s door, and restart from step 1.
-
Program Key Fob – Press LOCK and UNLOCK: Take your 2004 GMC Envoy key fob. Simultaneously press and hold both the LOCK and UNLOCK buttons on the key fob. Continue holding both buttons until you hear the door locks cycle again (lock and unlock). This might take up to 30 seconds. This step programs the key fob to your vehicle.
-
Program Additional Key Fobs: If you have additional key fobs (including existing remotes) to program, repeat step 10 immediately for each additional key fob.
-
Exit Programming Mode: Turn the ignition key to the ON position one last time. This action will exit the key fob programming mode.
-
Test Key Fobs: Test each programmed 2004 GMC Envoy key fob to ensure they are working correctly. Press the LOCK and UNLOCK buttons to verify remote functionality.
If you encounter any difficulties programming your 2004 GMC Envoy key fob or prefer professional assistance, you can search for a local key fob programming service in your area by entering your city or zip code online. Alternatively, for replacement key fobs, explore reputable online retailers specializing in keyless entry remotes for your 2004 GMC Envoy.
