How to Change the Battery in Subaru Outback Key Fob

Knowing how to change the battery in your Subaru Outback key fob can save you time and money. A dead key fob battery can leave you stranded, so it’s crucial to understand this simple process. Replacing the Battery in a Subaru Outback Key Fob

Identifying Your Subaru Outback Key Fob

Subaru has used a few different key fob designs over the years. Identifying your specific key fob is the first step in changing the battery. Older models might have a different battery compartment access than newer models. change battery subaru outback key fob Look for markings or model numbers on the back of your key fob. Knowing your Subaru Outback’s model year can also help you identify the correct key fob type.

What Tools Do I Need?

You won’t need any specialized tools for this task. A small flathead screwdriver is typically all you need to pry open the key fob. Some models may require a small Phillips head screwdriver. You’ll also need the correct replacement battery, typically a CR2032 or CR2025.

Step-by-Step Guide: How to Change the Battery in Subaru Outback Key Fob

Here’s a step-by-step guide on how to change the battery in your Subaru Outback key fob:

1. Locate the release button: This small button is usually on the side or back of the key fob.
2. Release the emergency key: Press the release button and slide out the emergency key.
3. Open the key fob: Use the small flathead screwdriver to gently pry open the key fob casing at the seam where the emergency key was located. Be careful not to damage the plastic.
4. Identify and remove the old battery: Note the orientation of the battery (+/-). Carefully pry out the old battery.
5. Install the new battery: Insert the new battery, ensuring it matches the orientation of the old one.
6. Close the key fob: Snap the two halves of the key fob back together.
7. Reinsert the emergency key: Slide the emergency key back into its slot.

how to change key fob battery subaru outback Test your key fob to ensure it’s working correctly. If not, double-check the battery installation and try again.

Common Problems and Solutions

Sometimes, even after replacing the battery, the key fob might not work. Here are a few common problems and their solutions:

• Incorrect battery installation: Ensure the battery is installed with the correct polarity.
• Damaged battery contacts: Inspect the battery contacts for corrosion or damage. Clean them with a cotton swab and rubbing alcohol if necessary.
• Key fob needs reprogramming: In rare cases, you might need to reprogram your key fob after changing the battery. Consult your owner’s manual or a professional locksmith.

“A common mistake is installing the battery backwards. Always double-check the polarity before closing the key fob,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair.

Key Fob Maintenance Tips

Keeping your key fob in good condition will extend its life. Avoid exposing it to extreme temperatures or moisture. 2018 subaru outback key fob battery change Consider using a protective case to prevent scratches and damage.

“Regularly inspecting your key fob for signs of wear and tear can prevent unexpected problems down the line,” adds John Smith.

Conclusion

Changing the battery in your Subaru Outback key fob is a simple and inexpensive task. By following these steps, you can save yourself the hassle and expense of visiting a dealership or locksmith. 2011 subaru outback key fob replacement Remember to keep a spare battery on hand for emergencies. key case for subaru fob

FAQ

1. How often should I change my key fob battery? Every 2-3 years, depending on usage.
2. Where can I buy replacement batteries? Most auto parts stores, electronics stores, and online retailers.
3. What type of battery does my Subaru Outback key fob use? Typically a CR2032 or CR2025.
4. Can I damage my key fob by changing the battery myself? It’s possible if you’re not careful. Use the correct tools and follow the steps carefully.
5. What if my key fob still doesn’t work after changing the battery? Check the battery polarity, clean the contacts, or consult a professional.
6. How do I know if my key fob battery is low? The car’s range might decrease, or you might experience intermittent functionality.
7. Is there a way to test my key fob battery? You can use a multimeter to test the battery’s voltage.

Need more help? Contact us via WhatsApp: +1 (641) 206-8880 Or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team.