Changing the key fob battery in your 2013 Lexus GS 350 is a quick and easy process that can save you time and money. This guide will walk you through each step, ensuring you’re back on the road with a fully functional key fob in no time.
Why Replace Your Key Fob Battery?
A dead key fob battery can leave you stranded, unable to unlock your car or start the engine. Recognizing the signs of a dying battery can prevent this inconvenient situation. Common indicators include decreased remote range, needing to be closer to the car for the fob to work, and the car not responding to the key fob at all. Regularly changing your 2013 Lexus GS 350 change key fob battery is a proactive measure to avoid such problems.
What You’ll Need for a 2013 Lexus GS 350 Key Fob Battery Replacement
Before you begin, gather these simple tools:
- A new CR2032 battery. This is the standard battery for most Lexus key fobs.
- A small flat-head screwdriver or a similar tool for prying open the key fob.
- Optional: A small tray or container to hold the small parts of the key fob to prevent losing them.
Having everything ready will make the process smoother.
Step-by-Step Guide to 2013 Lexus GS 350 Change Key Fob Battery Replacement
Follow these simple steps to replace your 2013 Lexus GS 350 key fob battery:
- Locate the release button: On the side of your key fob, find the small release button. This is usually near the metal key ring.
- Release the metal key: Press the release button and slide out the metal emergency key.
- Open the key fob: Using your flat-head screwdriver, carefully insert it into the slot where the metal key was. Gently pry open the two halves of the key fob. Be careful not to damage the plastic.
- Remove the old battery: Identify the old CR2032 battery. Gently pry it out using your screwdriver. Avoid touching the battery terminals.
- Install the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side is facing upwards.
- Close the key fob: Align the two halves of the key fob and press them together until they snap shut.
- Reinsert the metal key: Slide the metal key back into its slot.
- Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.
Common Issues and Troubleshooting
Sometimes, even after replacing the battery, the key fob might not work. Here are a few troubleshooting tips:
- Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
- Clean the battery terminals: If the terminals are dirty, clean them with a cotton swab and alcohol.
- Try reprogramming the key fob: In rare cases, you might need to reprogram the key fob to your car. Consult your owner’s manual for instructions.
Conclusion
Replacing the battery in your 2013 Lexus GS 350 change key fob battery is a simple task that anyone can do with the right tools and guidance. By following these steps, you can maintain the functionality of your key fob and avoid the inconvenience of a dead battery.
FAQs
- What type of battery does the 2013 Lexus GS 350 key fob use? A CR2032 battery.
- How often should I change my key fob battery? Every 2-3 years, or when you notice signs of a weakening battery.
- Can I replace the key fob battery myself? Yes, it’s a simple DIY task.
- What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, clean the terminals, or try reprogramming the key fob.
- Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers carry CR2032 batteries.
- How long does it take to replace the key fob battery? Usually just a few minutes.
- Do I need any special tools to change the battery? A small flat-head screwdriver is usually sufficient.
More Helpful Resources
- Key Fob Programming for Lexus Vehicles
- Understanding Your Lexus Key Fob Features
Need help with your Lexus key fob? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.
Leave a Reply