Is your 2006 Scion TC key fob failing to unlock your doors, or did you recently replace your remote and need to get it programmed? You might be surprised to learn that programming your key fob for your 2006 Scion TC can often be done right in your driveway without a trip to the dealership. This guide provides you with simple, easy-to-follow instructions to program your 2006 Scion TC key fob quickly and efficiently.
Step-by-Step 2006 Scion TC Key Fob Programming Instructions
Follow these steps carefully to program your 2006 Scion TC key fob:
-
Start with the Driver’s Door Open and Key Out: Ensure the driver’s side door is open and that the key is completely removed from the ignition switch. This is the starting point for initiating the programming sequence.
-
Insert and Remove the Key Twice (Within 5 Seconds): Quickly insert your key into the ignition switch and then remove it. Repeat this action once more, all within a 5-second timeframe. This action signals to the vehicle that you are about to begin key fob programming.
-
Close and Open Driver’s Door Twice (Within 40 Seconds): Within 40 seconds of the previous step, close the driver’s side door and then open it again. Repeat this close and open sequence one more time. This step further prepares the vehicle to enter programming mode.
-
Insert and Remove the Key Once: Insert the key into the ignition switch one more time and then immediately remove it. This step is crucial for timing and sequence in the programming process.
-
Close and Open Driver’s Door Twice Again (Within 40 Seconds): Again, within 40 seconds, close and then open the driver’s door twice. This repetitive action might seem redundant, but it is a specific part of the vehicle’s programming logic.
-
Insert Key, Close Door, and Cycle Ignition: Insert the key into the ignition switch and close the driver’s door. Now, you need to signal what programming mode you want to enter:
- Once (ON then OFF): To program a new remote while keeping existing programmed remotes.
- Twice (ON, OFF, ON then OFF): To program a new remote and erase all previously programmed remotes.
- Three Times (ON, OFF, ON, OFF, ON then OFF): To check how many remotes are currently programmed to your vehicle.
- Five Times (ON, OFF repeated five times): To erase all programmed remotes.
-
Remove Key and Observe Locks: Take the key out of the ignition. The vehicle’s system should respond by locking and unlocking the doors. The number of times the doors lock and unlock will depend on the mode you selected in the previous step. It will also indicate the number of remotes currently programmed (or confirmation of erasure).
-
Simultaneous Button Press (Within 40 seconds): Within 40 seconds of the doors locking and unlocking, take your new remote and press and release the LOCK and UNLOCK buttons at the same time.
-
Press Lock or Unlock Button (Within 3 seconds): Immediately after step 8, and within 3 seconds, press either the LOCK or the UNLOCK button on the remote by itself.
-
Confirm Programming: The system should respond by locking and then unlocking the doors one time to confirm successful programming. If the doors lock and unlock twice, it indicates that the programming attempt has failed.
-
Program Additional Remotes (Within 40 seconds): If you have more remotes to program, repeat steps 8-10 within 40 seconds to program each additional remote. You can program up to 4 remotes for your 2006 Scion TC.
-
Exit Programming Mode: To exit the programming mode, simply open the driver’s door.
Troubleshooting and Professional Help
If you encounter difficulties programming your 2006 Scion TC key fob, double-check each step and ensure you are following the timing accurately. If you continue to have trouble, it might be best to seek professional assistance.
Need a professional to program your key fob? Enter your city or zip code to find a local key fob installer.
