How to Program 2016 Subaru Impreza Key Fob

Programming a 2016 Subaru Impreza key fob can seem daunting, but with a little guidance, it’s a manageable task. This guide will walk you through the process, highlighting common issues and offering effective solutions, whether you’re a car owner, a mechanic, or an automotive technician.

Understanding Your 2016 Subaru Impreza Key Fob System

Before diving into programming, it’s important to understand your Subaru’s key fob system. The 2016 Impreza uses a sophisticated system that communicates wirelessly with your car. This system is vital for security and convenience features like remote locking/unlocking, push-button start, and panic alarm activation. Knowing how this system works can help troubleshoot issues and ensure a successful programming process.

Did you know that a dead key fob battery can sometimes mimic a programming issue? It’s always a good idea to check the battery first before attempting to reprogram. If you need help with that, see our guide on battery replacement on subaru key fob.

Step-by-Step Guide to Programming a 2016 Subaru Impreza Key Fob

Programming a 2016 Subaru Impreza key fob often requires a specific sequence of actions. Here’s a general guide, but always consult your owner’s manual for the precise procedure for your specific model:

1. Gather your materials: You’ll need all existing working key fobs and the new key fob you intend to program.
2. Enter the vehicle: Sit in the driver’s seat with the doors closed and all key fobs with you.
3. Cycle the ignition: This typically involves turning the key to the “ON” position and then back to the “OFF” position several times within a specific timeframe.
4. Enter programming mode: Watch for specific indicators like flashing hazard lights or a chime to confirm you’ve entered programming mode.
5. Program each key fob: Press and hold specific buttons on each key fob, including the new one, as instructed by your owner’s manual.
6. Exit programming mode: Turn the ignition on to finalize the programming process.

Remember, the exact steps can vary depending on the specific trim level and features of your Impreza. If you need a new fob, see our article how to get a new key fob for subaru.

“A common mistake people make is not having all their working key fobs present during the programming process. This can lead to previously programmed keys becoming deactivated,” advises John Smith, Senior Automotive Technician at Smith Automotive Solutions.

Troubleshooting Common Key Fob Programming Issues

Sometimes, things don’t go as planned. Here are some common issues and solutions:

• Key fob not recognized: Ensure the key fob battery is good. Try replacing the battery if necessary. Also, confirm you’re following the exact procedure for your model year.
• Programming mode not activating: Double-check the timing and sequence of the ignition cycling. A slight deviation can disrupt the process.
• Key fob works intermittently: This could indicate a faulty key fob or a problem with the car’s receiver.
• All key fobs stopped working after attempting to program a new one: This is usually an indication that the programming sequence wasn’t followed correctly. Start the process over, carefully adhering to the instructions.

Conclusion

Programming your 2016 Subaru Impreza key fob can be accomplished with careful attention to detail and by following the correct procedure. By understanding the process and troubleshooting common issues, you can save time and frustration.

FAQs

1. Can I program a used key fob to my 2016 Subaru Impreza? Yes, a used key fob can be programmed, but it must be compatible with your car’s system.
2. How many key fobs can I program to my car? Most 2016 Subaru Imprezas can accommodate multiple key fobs. Refer to your owner’s manual for the specific limit.
3. What if I lose all my key fobs? You’ll need to contact a Subaru dealership or a qualified locksmith who can program new key fobs for your car.
4. How much does it cost to program a Subaru key fob? The cost can vary depending on the service provider and your location.
5. Can I program a key fob myself? Yes, following the steps outlined in your owner’s manual, you can often program a key fob yourself.
6. Do I need special tools to program a key fob? Generally, you won’t need special tools for basic programming. However, some advanced functions might require diagnostic equipment.
7. What if I follow the instructions and it still doesn’t work? If you’re experiencing difficulties, it’s best to consult a professional automotive technician or a Subaru dealership.

Need further support? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.