Replacing Battery in 2017 Volvo Key Fob

Replacing the battery in your 2017 Volvo key fob is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through the steps involved in Replacing Battery In 2017 Volvo Key Fob, so you can get back on the road in no time. Let’s dive into the details!

How to Replace Your 2017 Volvo Key Fob Battery

A dead key fob battery can be incredibly frustrating. Fortunately, replacing it is usually a straightforward task. Here’s a step-by-step guide for replacing battery in 2017 volvo key fob:

1. Locate the release button: On the side of your key fob, you’ll find a small button or notch. This is the release button for the physical key blade.
2. Release the key blade: Press the release button and slide the key blade out of the fob.
3. Open the fob: Use the key blade or a small flathead screwdriver to carefully pry open the two halves of the key fob. Start at the notch where the key blade was located. Be gentle to avoid damaging the plastic.
4. Identify the battery: Inside the fob, you’ll see the battery. It’s typically a CR2032 3-volt lithium battery.
5. Remove the old battery: Gently pry out the old battery using your fingernail or the flathead screwdriver. Avoid puncturing the battery.
6. Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing upwards, just as the old battery was positioned.
7. Close the fob: Align the two halves of the key fob and press them together until they snap securely shut.
8. Reinsert the key blade: Slide the key blade back into its slot in the fob.

Common Issues When Replacing Your Volvo Key Fob Battery

Even with a seemingly simple task like replacing a battery, issues can arise. Here are a few common problems and their solutions:

• The fob won’t open: If you’re struggling to pry open the fob, try using a slightly larger flathead screwdriver or a plastic opening tool. Be careful not to apply too much force, as this can damage the plastic. You might want to check out volvo key fob shell replacement for more information.
• The new battery doesn’t fit: Double-check that you’ve purchased the correct battery type (CR2032). Sometimes, batteries can be slightly different sizes, even if they’re labeled the same.
• The key fob still doesn’t work after replacing the battery: If you’ve installed the new battery correctly and the key fob still isn’t functioning, there might be another issue with the fob itself. You might need to have the 2017 volvo key fob reprogrammed. For information on other Volvo key fobs, you could look at the 2017 volvo s90 key fob.

Why Replace Your Key Fob Battery Yourself?

Replacing your key fob battery yourself is a simple way to save money and time. Dealerships often charge a premium for this simple service. By following the steps outlined above, you can easily do it yourself in just a few minutes. If your key fob is completely dead and you need to start your car, check out this article: how to start volvo with dead key fob. For information specific to the XC60, there’s a guide available for volvo xc60 key fob battery replacement.

Conclusion

Replacing the battery in your 2017 Volvo key fob is a quick, easy, and cost-effective process. By following this guide, you can avoid the inconvenience and expense of a dealership visit. So grab a new CR2032 battery and get back to enjoying the convenience of your Volvo key fob.

Need Support? Contact us via WhatsApp: +1 (641) 206-8880 Or visit our location: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to assist you.