2016 Jeep Grand Cherokee Replace Key Fob Battery

Replacing the key fob battery in your 2016 Jeep Grand Cherokee is a simple process that can save you time and money. This guide will walk you through the steps involved, troubleshooting common issues, and answer frequently asked questions.

If your 2016 Jeep Grand Cherokee key fob is acting up, it might just be a dead battery. Knowing how to replace it yourself can be a real lifesaver. This guide provides clear, step-by-step instructions, helpful tips, and answers to common questions.

Understanding Your Key Fob

Before diving into the replacement process, let’s take a quick look at the key fob itself. The 2016 Jeep Grand Cherokee uses a smart key fob, which combines keyless entry and remote start functionality. Understanding its components will help you navigate the battery replacement process with confidence.

Identifying the Battery Type

The 2016 Jeep Grand Cherokee key fob utilizes a CR2032 battery, a common type found in many electronic devices. These batteries are readily available at most stores. Having a spare on hand is always a good idea. For information on another Jeep model, check out key fob replacement battery for jeep renegade.

How to Replace the 2016 Jeep Grand Cherokee Key Fob Battery

This section provides a comprehensive step-by-step guide to replacing your key fob battery.

1. Locate the Release Button: On the side of your key fob, you’ll find a small release button. This button releases the emergency key blade.
2. Release the Key Blade: Press the release button and slide the emergency key blade out.
3. Open the Key Fob: Use the tip of the emergency key blade (or a small flathead screwdriver) to pry open the key fob casing along the seam. Be gentle to avoid damaging the plastic.
4. Remove the Old Battery: Carefully remove the old CR2032 battery. Note the orientation of the battery for correct replacement.
5. Install the New Battery: Insert the new CR2032 battery, making sure it’s positioned correctly, matching the orientation of the old battery.
6. Reassemble the Key Fob: Snap the two halves of the key fob casing back together.
7. Test the Key Fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

“A common mistake people make is not paying attention to the battery’s orientation. Make sure the positive (+) side is facing up,” advises John Smith, Senior Automotive Technician at Smith Auto Repair.

Troubleshooting Key Fob Issues

Sometimes, replacing the battery doesn’t solve the problem. Here are some common issues and their solutions:

• Key Fob Not Detected: If your vehicle still doesn’t recognize your key fob after replacing the battery, try reprogramming it. Refer to your owner’s manual for instructions. You can also check out our article on jeep key fob not detected.
• Key Fob Buttons Not Working: If certain buttons are unresponsive, it could be a faulty key fob. Consider replacing the entire fob. Check out how to how to replace jeep cherokee key fob battery.

“Another helpful tip is to clean the battery contacts inside the key fob with a cotton swab and alcohol. This can improve connectivity,” adds Jane Doe, Electrical Systems Specialist at Doe Auto Electronics.

For details on an older model, see our post on 2001 jeep key fob battery.

Conclusion

Replacing the key fob battery in your 2016 Jeep Grand Cherokee is a straightforward process that you can easily do yourself. By following the steps outlined in this guide, you can save money and get back on the road quickly. You might also find our article on the 2016 jeep grand cherokee limited key fob battery helpful.

FAQ

1. How long do key fob batteries typically last? Key fob batteries usually last between 3-5 years.
2. What type of battery does a 2016 Jeep Grand Cherokee key fob use? A CR2032 battery.
3. What should I do if my key fob still doesn’t work after replacing the battery? Try reprogramming the key fob.
4. Where can I purchase a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers carry them.
5. Can I damage my key fob by replacing the battery myself? It’s unlikely, but be gentle to avoid breaking any plastic parts.
6. How do I know if my key fob needs a new battery? The most common sign is decreased range or unresponsive buttons.
7. Is there a way to test my key fob battery? Most stores selling these batteries also have testers.

Need help with your Jeep Key Fob? Contact us via Whatsapp: +1 (641) 206-8880 or visit our shop at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.