Changing the Battery in a Subaru Outback Key Fob

Changing the battery in your Subaru Outback key fob is a quick and easy process that can save you time and frustration. This guide will walk you through each step, from identifying the right battery to successfully replacing it, so you can get back on the road with minimal hassle.

Why Change Your Subaru Outback Key Fob Battery Yourself?

Replacing your key fob battery is a simple task that most car owners can handle themselves, avoiding a trip to the dealership or an auto repair shop. Knowing how to change the battery yourself not only saves you money but also the inconvenience of being stranded with a dead key fob. change key fob battery 2020 subaru outback

When Should I Change the Battery?

Recognizing the signs of a dying key fob battery is essential. These signs can include decreased remote range, requiring you to be closer to your car to unlock or lock it, or the key fob’s buttons becoming unresponsive or requiring multiple presses.

What if my Subaru Outback key fob battery is completely dead? Even if your battery is entirely dead, the key fob still has a physical key hidden inside that allows you to manually unlock the driver’s side door and start the ignition. subaru outback key fob battery dead

What You’ll Need to Change Your Key Fob Battery

Before you begin, gather the following items:

  • A new CR2032 battery. This is the standard battery for most Subaru Outback key fobs. Double-check your owner’s manual to be sure.
  • A small flathead screwdriver or a similar tool for prying open the key fob.
  • A small container or tray to hold the small parts.

Step-by-Step Guide to Changing Your Subaru Outback Key Fob Battery

Follow these steps to change the battery in your Subaru Outback key fob:

  1. Locate the small release button on the back of the key fob.
  2. Press the release button and slide the mechanical key out of the fob.
  3. Insert the flathead screwdriver into the small slot where the mechanical key was and gently pry open the key fob casing. Be careful not to damage the plastic.
  4. Locate the old CR2032 battery.
  5. Carefully remove the old battery.
  6. Insert the new CR2032 battery, ensuring the positive (+) side faces up, just like the old battery.
  7. Snap the key fob casing back together.
  8. Reinsert the mechanical key.
  9. Test the key fob functionality by locking and unlocking your car.

how to change batteries in subaru key fob

How long does it take to change a Subaru Outback key fob battery?

The process is quite quick and should only take about 5-10 minutes to complete.

Expert Tip: “Remember to dispose of your old battery responsibly. Most stores that sell batteries also have battery recycling programs.”John Smith, Automotive Electrician

Where to Buy a Replacement Battery

CR2032 batteries are readily available at most electronics stores, pharmacies, and online retailers. battery for subaru outback key fob 2010

how to change the battery on a subaru key fob

Conclusion

Changing The Battery In A Subaru Outback Key Fob is a simple DIY task. By following these steps, you can save time and money while keeping your key fob functioning correctly.

FAQ

  1. What type of battery does a Subaru Outback key fob use? A CR2032 battery.
  2. How do I know if my key fob battery is low? Decreased range, unresponsive buttons.
  3. Can I change the battery myself? Yes, it’s a simple process.
  4. Where can I buy a replacement battery? Electronics stores, pharmacies, online.
  5. What if I break my key fob while trying to change the battery? Contact a qualified automotive locksmith or your Subaru dealer.
  6. How long does a key fob battery typically last? Typically 2-3 years.
  7. Can I use a different type of battery? No, stick to the recommended CR2032.

Common Issues and Troubleshooting

  • Key fob still not working after battery change: Ensure the new battery is installed correctly with the positive (+) side facing up. If the problem persists, there may be a more serious issue with the key fob itself, and you should consult a professional.
  • Key fob casing cracked during opening: Be gentle when prying open the casing. If it cracks, you might need a replacement key fob.

Further Assistance

For more information or if you encounter any issues, please refer to our articles on subaru outback key fob battery dead and how to change the battery on a subaru key fob.

Need help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *