If your 2019 Jeep Cherokee key fob is acting up, a dying Battery For A 2019 Jeep Cherokee Key Fob might be the culprit. This guide provides everything you need to know about replacing the battery in your Jeep Cherokee key fob, from identifying the right battery to step-by-step replacement instructions.
Recognizing a Dying Key Fob Battery
Several signs indicate your 2019 Jeep Cherokee key fob battery is failing. Reduced operating range is a common symptom. You might find yourself standing closer to your vehicle than usual to lock or unlock it. Another indicator is a weakened signal; the car might not respond to the key fob on the first try. Sometimes, the key fob buttons might feel unresponsive or require multiple presses. If you’re experiencing any of these issues, a new jeep 2019 cherokee key fob battery is likely the solution.
What Battery Does a 2019 Jeep Cherokee Key Fob Use?
The 2019 Jeep Cherokee key fob uses a CR2032 battery, a common type found in many electronic devices. These batteries are readily available at most stores that sell batteries. It’s wise to always have a spare on hand to avoid being stranded.
How to Replace the Battery in a 2019 Jeep Cherokee Key Fob
Replacing the battery for a 2019 jeep cherokee key fob is a simple DIY task. First, locate the small release button on the side of your key fob. Press this button and gently separate the key fob’s two halves. Once open, you’ll see the CR2032 battery. Carefully remove the old battery and replace it with the new one, ensuring the positive (+) side faces up. Finally, snap the two halves of the key fob back together.
Step-by-Step Instructions:
- Find the small release button on your key fob.
- Press the release button and separate the key fob halves.
- Locate the CR2032 battery inside.
- Remove the old battery.
- Insert the new CR2032 battery, positive (+) side up.
- Snap the key fob halves back together.
replace key fob battery 2019 jeep cherokee is a quick process, and with these instructions, you can do it at home.
Tips and Troubleshooting
Make sure the new battery is correctly oriented. An incorrectly installed battery can damage the key fob. If the key fob still doesn’t work after replacing the battery, there might be another issue, such as a faulty key fob or a problem with your vehicle’s receiver.
“Always check the battery first,” advises John Smith, a certified automotive locksmith. “A dead battery is the most common key fob issue.” Another expert, Sarah Jones, a senior automotive technician, adds, “Keeping a spare CR2032 battery in your glove compartment is always a smart idea.”
Conclusion
Replacing the battery for a 2019 jeep cherokee key fob is a straightforward process that can save you time and money. By following the simple steps outlined in this guide, you can easily restore your key fob to full functionality. If you need further assistance or require a new 2019 jeep grand cherokee limited key fob battery, KEYFOBPROG is here to help.
FAQs
- What type of battery does a 2019 Jeep Cherokee key fob use? CR2032
- How often should I replace my key fob battery? Every 2-3 years, depending on usage.
- Can I replace the battery myself? Yes, it’s a simple DIY process.
- Where can I buy a replacement battery? Most stores that sell batteries carry CR2032 batteries.
- What if my key fob still doesn’t work after replacing the battery? There might be another issue, and you should consult a professional.
- My key fob has a much shorter range than before, is it the battery? Likely yes, but it could also be interference.
- Can I damage my key fob by replacing the battery myself? Unlikely, as long as you follow the instructions carefully.
Need help with your jeep cherokee key fob battery replacement 2019? Check out our other helpful articles like key fob battery for jeep cherokee 2019 on our website.
Need support? Contact us via Whatsapp: +1 (641) 206-8880. Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team.
Leave a Reply