How to Replace Battery in 2016 Chevy Malibu Key Fob

Replacing the battery in your 2016 Chevy Malibu key fob is a quick and easy process that can save you time and money. Knowing how to do it yourself can prevent the inconvenience of a dead key fob leaving you stranded. This guide will walk you through the steps involved in changing your 2016 Chevy Malibu key fob battery, troubleshooting common problems, and offering expert advice to keep your key fob in top condition.

What You’ll Need to Replace Your 2016 Chevy Malibu Key Fob Battery

Before you begin, gather the following:

A new CR2032 battery (This is the correct battery for the 2016 Chevy Malibu key fob).
A small flat-head screwdriver or a similar tool for prying.
Optionally, a small plastic pry tool can prevent scratching your key fob.

Step-by-Step Guide to 2016 Chevy Malibu Key Fob Battery Replacement

Locate the release button: On the side of your 2016 Chevy Malibu key fob, you will find a small release button or slot.
Insert the flat-head screwdriver: Carefully insert the flat-head screwdriver into the slot or press the release button. Gently pry the two halves of the key fob apart.
Identify the old battery: Inside the key fob, you’ll see the CR2032 battery. Note its position and orientation.
Remove the old battery: Using your screwdriver or pry tool, carefully lift the old battery out of its compartment.
Insert the new battery: Place the new CR2032 battery into the compartment, ensuring it matches the orientation of the old battery.
Reassemble the key fob: Snap the two halves of the key fob back together until you hear a click.
Test the key fob: Try locking and unlocking your car to confirm the new battery is working.

Common Issues When Replacing a 2016 Chevy Malibu Key Fob Battery

Key Fob Still Not Working After Battery Replacement?

Sometimes, even after replacing the battery, your key fob might not work. This could be due to a few reasons:

Incorrect battery installation: Double-check that the new battery is correctly positioned and oriented.
Dead key fob: If you suspect your key fob is completely dead, check out our article on dead key fob chevy malibu.
Need for reprogramming: Occasionally, a key fob might need to be reprogrammed after a battery change. See our guide on 2016 chevy malibu key fob programming for assistance.

Protecting Your Key Fob

Consider a key fob cover chevy malibu to protect your key fob from damage and keep it looking new.

Closing and Reassembling the Chevy Malibu Key Fob

“A common mistake people make is using the wrong type of battery,” says automotive expert, John Smith, from Automotive Solutions Inc. “Always ensure you are using a CR2032 battery for the 2016 Chevy Malibu key fob.” Another tip from John: “Using a plastic pry tool can prevent any unwanted scratches on your key fob during the process.”

How Often Should I Replace My Key Fob Battery?

The lifespan of a key fob battery can vary, but it’s generally recommended to replace it every 2-3 years. If you notice your key fob’s range decreasing or the buttons becoming less responsive, it might be time for a new replacement battery for chevy key fob. You can also find more specific instructions on 2016 chevy malibu key fob battery replacement.

Conclusion

Replacing the battery in your 2016 Chevy Malibu key fob is a straightforward task that you can easily accomplish at home. By following these steps, you can avoid the frustration and cost of a dead key fob. Remember to always use the correct CR2032 battery and handle the key fob with care.

FAQ

What type of battery does the 2016 Chevy Malibu key fob use? It uses a CR2032 battery.
How long does a key fob battery usually last? Typically 2-3 years.
Do I need to reprogram my key fob after replacing the battery? Usually, no, but occasionally it might be necessary.
Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers sell them.
What should I do if my key fob still doesn’t work after replacing the battery? Check the battery installation, or consult a professional.
Can I damage my key fob by replacing the battery myself? It’s unlikely, but using the right tools and being gentle can prevent accidental damage.
Is there a way to protect my key fob from wear and tear? Yes, using a key fob cover can help.

Common Situations and Questions:

My key fob works intermittently: This often indicates a dying battery.
My key fob only works very close to the car: This also suggests a weak battery.
The key fob buttons feel stiff or unresponsive: This could be due to a dead battery or other internal issues.

Other helpful resources:

Check out our article on how to program a 2017 Chevy Malibu key fob.
Learn about different types of key fobs and their functionalities.

Need assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.