A dead key fob battery can be a real hassle, especially if you’re rushing to get somewhere. If you own a Subaru Legacy 2018 and are experiencing issues with your key fob, a dying battery is often the culprit. This comprehensive guide provides everything you need to know about the Subaru Legacy 2018 Key Fob Battery, from identifying signs of a low battery to replacing and programming it yourself.
Identifying a Dying Subaru Legacy 2018 Key Fob Battery
Is your Subaru Legacy 2018 key fob acting up? Reduced range, intermittent functionality, or the need to press the buttons repeatedly are all telltale signs of a weak battery. take apart subaru key fob Sometimes, the car may not recognize the key fob at all. Knowing these signs can save you time and frustration.
What type of battery does a 2018 Subaru Legacy key fob use?
The 2018 Subaru Legacy key fob utilizes a CR2032 battery, a common type readily available at most stores.
Replacing the Subaru Legacy 2018 Key Fob Battery
Replacing the battery in your Subaru Legacy 2018 key fob is a simple process you can do at home. subaru 2018 key fob You’ll need a new CR2032 battery and a small flat-head screwdriver.
Step-by-step guide to replacing your key fob battery:
- Locate the small release button or notch on the key fob.
- Use the flat-head screwdriver to carefully pry open the key fob casing.
- Identify the CR2032 battery.
- Gently remove the old battery and insert the new one, ensuring the positive (+) side faces up.
- Snap the key fob casing back together.
“A common mistake people make is inserting the battery incorrectly,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair. “Always double-check the polarity before closing the fob.”
Programming Your Subaru Legacy 2018 Key Fob
In most cases, you won’t need to reprogram your key fob after a battery replacement. how to replace a battery subaru 2008 key fob The car should automatically recognize the key fob once the new battery is installed. However, if you’re still experiencing issues, you might need to subaru legacy reprogramming key fobs.
When should I reprogram my key fob?
If your key fob is still malfunctioning after a battery change, reprogramming might be necessary. This could be due to a variety of reasons, including a faulty key fob or issues with the car’s receiver. subaru key fob replacement programming
“While rare, sometimes a key fob needs to be re-synchronized with the car’s system after a battery change,” explains Jane Doe, Electrical Systems Specialist at Doe’s Auto Electric. “This usually involves a specific sequence of steps using the key fob and the ignition.”
Conclusion
Replacing the subaru legacy 2018 key fob battery is a straightforward process that most car owners can handle themselves. By following this guide, you can quickly and easily get your key fob back in working order.
FAQ
- What type of battery does a 2018 Subaru Legacy key fob take? A CR2032 battery.
- Do I need to reprogram my key fob after changing the battery? Usually not, but it might be necessary in some cases.
- Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- How long does a Subaru Legacy key fob battery last? Typically 2-3 years, depending on usage.
- What tools do I need to replace the battery? A small flat-head screwdriver.
- What should I do if my key fob still doesn’t work after replacing the battery? Consult your owner’s manual or a qualified automotive technician.
- Can I damage my key fob by replacing the battery myself? It’s unlikely, but be careful not to force anything open.
Also take a look at some related articles on our site, like those dealing with taking apart your key fob or general information about 2018 Subaru key fobs.
Need help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to assist you.
Leave a Reply