Dodge Ram 2019 Key Fob Battery: Replacement, Programming, and FAQs

Replacing the key fob battery in your Dodge Ram 2019 is a simple task that can save you time and money. This guide will walk you through the process, covering everything from identifying the correct battery to programming the key fob once the new battery is installed. We’ll also address common issues and offer troubleshooting tips to ensure your key fob works flawlessly.

Identifying the Correct Dodge Ram 2019 Key Fob Battery

Before you begin, it’s crucial to identify the correct battery for your 2019 Dodge Ram key fob. Using the wrong battery can damage the fob and create further problems. The correct battery for most 2019 Dodge Ram key fobs is a CR2032 3V lithium coin battery. This battery is readily available at most auto parts stores, pharmacies, and online retailers.

What type of battery does a 2019 Dodge Ram key fob use?

A 2019 Dodge Ram key fob uses a CR2032 3V lithium coin battery.

Step-by-Step Guide to Replacing Your Dodge Ram 2019 Key Fob Battery

Replacing the battery is a straightforward process. Here’s a step-by-step guide:

Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the emergency key.
Separate the key fob halves: Using the emergency key or a small flathead screwdriver, carefully pry open the key fob casing. Be gentle to avoid damaging the plastic.
Remove the old battery: Identify the CR2032 battery and carefully remove it using your fingernail or the flathead screwdriver.
Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces upwards.
Reassemble the key fob: Align the two halves of the key fob and press them together until they snap securely shut.
Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

How do you open a Dodge Ram 2019 key fob?

You can open a Dodge Ram 2019 key fob by pressing the release button and gently prying it open with the emergency key or a small flathead screwdriver.

Programming Your Dodge Ram 2019 Key Fob After Battery Replacement

In most cases, you won’t need to reprogram your key fob after replacing the battery. However, if your key fob is not functioning correctly, you might need to perform a reprogramming procedure. Refer to your owner’s manual for the specific reprogramming instructions for your 2019 Dodge Ram model.

Do I need to reprogram my Dodge Ram 2019 key fob after changing the battery?

Usually, no reprogramming is needed. If issues arise, consult your owner’s manual for model-specific instructions.

Troubleshooting Common Dodge Ram 2019 Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work as expected. Here are a few troubleshooting tips:

Check the battery orientation: Ensure the battery is installed correctly with the positive (+) side facing up.
Try a different battery: Occasionally, a new battery might be faulty. Try a different CR2032 battery to rule this out.
Check for damage: Inspect the key fob for any physical damage, like cracks or broken buttons.
Consult your owner’s manual: Your owner’s manual contains valuable information about your key fob and its functions.

Conclusion

Replacing the Dodge Ram 2019 Key Fob Battery is a simple task that most owners can easily accomplish. By following the steps outlined in this guide, you can save yourself the cost of a trip to the dealership. Remember to always use the correct CR2032 battery and consult your owner’s manual for any model-specific instructions.

FAQs

How long does a Dodge Ram 2019 key fob battery last? Typically, a key fob battery lasts between 3-5 years.
Can I use a different battery type in my Dodge Ram 2019 key fob? No, you should only use a CR2032 3V lithium coin battery.
What if my key fob still doesn’t work after replacing the battery? Consult your owner’s manual or contact a qualified automotive technician.
Where can I buy a replacement CR2032 battery? CR2032 batteries are readily available at most auto parts stores, pharmacies, and online retailers.
How do I know if my key fob battery is low? You might notice decreased range or intermittent functionality.
Can I program a new key fob myself? Refer to your owner’s manual for specific programming instructions, as some models may require dealer programming.
What if I lose my only key fob? Contact a locksmith or dealership for assistance.

Situations & Questions

Situation: Key fob works intermittently or only at close range. Question: Is my key fob battery dying?
Situation: Key fob stopped working after I dropped it. Question: Could I have damaged the key fob internally?
Situation: Replaced the battery, key fob still not working. Question: Do I need to reprogram the key fob?

Programming Your Dodge Ram Key Fob: A Comprehensive Guide
Understanding Your Dodge Ram’s Keyless Entry System
Common Car Key Fob Problems and Solutions

Need help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.