Subaru Outback Key Fob Battery Change: A Comprehensive Guide

Changing your Subaru Outback key fob battery is a simple task that can save you time and money. This guide will provide a step-by-step process, addressing common issues and offering solutions for a smooth Subaru Outback Key Fob Battery Change.

Subaru Outback Key Fob Battery Location

Why Change Your Subaru Outback Key Fob Battery?

A dying key fob battery can lead to several frustrating situations, such as reduced signal range, intermittent functionality, or even a complete failure to unlock or start your car. Replacing the battery proactively prevents these inconveniences. Don’t wait until you’re stranded!

When to Change Your Key Fob Battery

Several signs indicate it’s time for a subaru outback key fob battery change. These include:

• Decreased range: You have to be much closer to your car for the key fob to work.
• Intermittent operation: The key fob sometimes works and sometimes doesn’t.
• Indicator lights on the key fob are dim or non-existent.
• The car’s security system doesn’t respond to the key fob.

2018 subaru outback key fob battery change

What You’ll Need

• A new CR2032 battery (commonly available at most stores).
• A small flathead screwdriver or a similar tool to pry open the key fob.

Step-by-Step Subaru Outback Key Fob Battery Change Instructions

1. Locate the release button or notch: This is usually located on the side or back of the key fob. Consult your owner’s manual if you’re unsure.
2. Carefully insert the flathead screwdriver: Gently pry open the key fob casing. Avoid using excessive force, which could damage the plastic.
3. Identify the old battery: It’s a small, round, silver disc.
4. Remove the old battery: Gently pry it out using your screwdriver.
5. Insert the new battery: Make sure the positive (+) side is facing upwards, the same way the old battery was positioned.
6. Close the key fob casing: Snap the two halves back together.

change key fob battery 2020 subaru outback

Troubleshooting

Sometimes, even after a subaru outback key fob battery change, the key fob might not function correctly. Here are some troubleshooting tips:

• Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
• Try re-synchronizing the key fob: Consult your owner’s manual for the specific procedure for your Subaru Outback model year. This usually involves a sequence of locking/unlocking the doors or turning the ignition on and off.
• Inspect the key fob for damage: If the casing is cracked or damaged, it could be interfering with the signal.

how to change the battery in subaru outback key fob

How long does a Subaru Outback key fob battery last?

Typically, a Subaru Outback key fob battery lasts between 3-5 years. However, factors like frequency of use and environmental conditions can affect its lifespan.

Can I change the Subaru Outback key fob battery myself?

Absolutely! It’s a simple process that anyone can do at home with minimal tools. This guide provides you with all the information you need for a successful subaru outback key fob battery change.

how to change key fob battery in 2018 subaru outback

New Battery Installed in Subaru Outback Key Fob

Conclusion

Changing your Subaru Outback key fob battery is a quick and easy DIY task. By following this guide, you can avoid the frustration of a malfunctioning key fob and keep your Subaru running smoothly. Don’t hesitate to tackle this subaru outback key fob battery change yourself and save time and money.

FAQs

1. What type of battery does the Subaru Outback key fob use? A CR2032 battery.
2. How often should I change my Subaru Outback key fob battery? Every 3-5 years, or sooner if you notice signs of a weak battery.
3. What if my key fob still doesn’t work after changing the battery? Try re-synchronizing the key fob or inspect it for damage.
4. Where can I buy a replacement CR2032 battery? Most convenience stores, pharmacies, and electronics stores carry them.
5. Do I need any special tools to change the battery? A small flathead screwdriver or similar tool will suffice.
6. Can I damage my key fob by changing the battery myself? While unlikely, it’s possible to damage the casing if you apply excessive force. Be gentle.
7. Is there a reset button on the Subaru Outback key fob? No, there isn’t a specific reset button, but re-synchronizing the key fob often achieves a similar effect.

change battery subaru outback key fob

Need help with your Subaru Outback key fob? Contact us via Whatsapp: +1 (641) 206-8880 or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team available to assist you.