Lost your key fob or need to program a new one for your 2008 Scion xB? Programming your key fob yourself can save you time and money compared to dealership services. This guide provides you with simple, step-by-step instructions to program your 2008 Scion xB key fob quickly and efficiently at home.
Programming Your 2008 Scion xB Key Fob: Easy Steps
Before you begin, ensure you have your new key fob and your 2008 Scion xB vehicle. Follow these instructions carefully to successfully program your remote:
-
Start with Key and Door Position: Make sure your 2008 Scion xB key is out of the ignition. Open and unlock only the driver’s side door. Ensure all other doors, including the trunk or hatchback, are completely closed.
-
Key Insertion Sequence (Part 1): Within 5 seconds of opening the driver’s door, insert your key into the ignition switch and pull it out twice in quick succession.
-
Door Close and Open Sequence (Part 1): Next, close and then open the driver’s side door twice.
-
Key Insertion Sequence (Part 2): Insert the key into the ignition switch again, and then immediately remove it.
-
Door Close and Open Sequence (Part 2): Once again, close and then open the driver’s side door twice.
-
Final Key Insertion: Insert the key into the ignition switch one last time, and this time, leave it in the ignition.
-
Close Driver’s Door: Close the driver’s side door.
-
Ignition Cycle: Turn the ignition switch to the “ON” position, and then immediately turn it back to the “OFF” position.
-
Remove Key: Take the key out of the ignition switch.
-
Confirmation – Locks Cycle: You should now observe the door locks cycling (locking and unlocking automatically). This lock cycling indicates that your 2008 Scion xB has successfully entered programming mode and is ready to learn the new key fob.
-
Programming the Key Fob: Take your first key fob remote that you wish to program. Press and hold both the “LOCK” and “UNLOCK” buttons simultaneously for about 1.5 seconds. After releasing these buttons, immediately press and hold only the “LOCK” button for 2 seconds.
-
Confirmation – Locks Cycle Again: The door locks should cycle once more to confirm that the remote has been successfully programmed. If you have additional key fobs to program, repeat step 12 for each additional remote. If you are finished programming remotes, proceed to the next step.
-
Exit Programming Mode: Open the driver’s side door. This action will finalize the programming sequence and exit the programming mode.
Your 2008 Scion Xb Key Fob Programming is now complete. Test the programmed key fob to ensure all buttons are functioning correctly, including lock, unlock, and any other functions your fob may have.
If you encounter any difficulties during this process, double-check each step and ensure you are following the timing accurately. If you prefer professional assistance, you can always search for a local key fob programming service in your area for expert help.
