Replacing the battery in your 2014 Subaru Impreza key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, covering everything from identifying the correct battery type to properly disposing of the old one. We’ll also address common issues and offer helpful tips for a smooth battery replacement experience.
Understanding Your 2014 Subaru Impreza Key Fob
Before diving into the replacement process, it’s helpful to understand the function of your key fob. This small device allows you to lock and unlock your car remotely, often including features like panic buttons and remote start. The key fob relies on a small battery to power these functions. Over time, this battery will weaken and eventually die, requiring replacement.
Why Does My Key Fob Battery Die?
Like any battery, the one in your 2014 Subaru Impreza key fob has a limited lifespan. Frequent use, extreme temperatures, and even just the passage of time can contribute to battery drain.
Signs of a Dying Key Fob Battery
Several signs indicate your 2014 Subaru Impreza key fob battery is nearing its end. Reduced range, intermittent functionality, and the need to press buttons multiple times are common indicators. In some cases, the car might not respond to the key fob at all.
How to Replace the 2014 Subaru Impreza Key Fob Battery
Replacing the battery in your 2014 Subaru Impreza key fob is a surprisingly straightforward process. Here’s a step-by-step guide:
-
Gather Your Tools: You’ll need a small flathead screwdriver or similar tool and a replacement CR2032 battery.
-
Locate the Key Fob Release: On the side of your key fob, you’ll find a small release button or slot.
-
Separate the Key Fob Halves: Press the release and gently separate the two halves of the key fob.
-
Identify the Battery: Inside the key fob, you’ll see the CR2032 battery.
-
Remove the Old Battery: Carefully pry out the old battery using your flathead screwdriver.
-
Insert the New Battery: Make sure the positive (+) side of the new battery is facing upwards.
-
Reassemble the Key Fob: Snap the two halves of the key fob back together.
Common Issues and Troubleshooting
Sometimes, even a simple battery replacement can encounter a few hiccups. Here are some common issues and their solutions:
-
Key Fob Still Not Working: Double-check that the new battery is correctly installed and that it’s not a dud. Try re-synchronizing your key fob with your car if the problem persists.
-
Key Fob Case Broken: Be gentle when separating the key fob halves. If you break the case, you might need a replacement key fob.
Expert Insight
“A common mistake people make is using the wrong type of battery,” says John Smith, Senior Automotive Technician at KEYFOBPROG. “Always ensure you’re using a CR2032 battery for the 2014 Subaru Impreza key fob.”
Conclusion
Replacing the 2014 Subaru Impreza key fob battery is a quick and easy task that anyone can handle. By following this guide, you can save yourself a trip to the dealership and keep your key fob functioning properly.
FAQ
- What type of battery does a 2014 Subaru Impreza key fob use? A CR2032 battery.
- How long does a 2014 Subaru Impreza key fob battery last? Typically 2-3 years.
- Can I replace the battery myself? Yes, it’s a simple process.
- Where can I buy a replacement battery? Most electronics stores and online retailers.
- What if my key fob still doesn’t work after replacing the battery? Try re-synchronizing the key fob or check for damage.
- How do I re-synchronize my key fob? Consult your owner’s manual for specific instructions.
- How much does a replacement key fob cost? Prices vary but expect to pay between $50 and $200.
Need Help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team.
Leave a Reply