2013 Chrysler 300 Key Fob Battery Change: A Comprehensive Guide

Changing the battery in your 2013 Chrysler 300 key fob is a simple process that can save you time and money. This guide will walk you through each step, from identifying the correct battery to testing the fob after the change. We’ll also cover common issues and troubleshooting tips to get you back on the road quickly.

Understanding Your 2013 Chrysler 300 Key Fob

Before we dive into the battery change process, it’s important to understand your key fob. The 2013 Chrysler 300 utilizes a proximity-based keyless entry system. This means your car recognizes the key fob when it’s nearby, allowing you to unlock the doors and start the engine without physically inserting a key. A dying battery can interrupt this process, leading to frustrating lockouts or starting problems. Knowing how to change the battery yourself can prevent these inconveniences.

Locating the Battery Compartment on a 2013 Chrysler 300 Key Fob

What You’ll Need for a 2013 Chrysler 300 Key Fob Battery Change

The good news is, you only need a few simple tools: a small flathead screwdriver (or a similar tool for prying), and a replacement CR2032 battery. These batteries are readily available at most stores. You might also want a small container or tray to keep the small parts organized.

Having trouble with your Chrysler 200’s key fob? Check out our guide on 2012 chrysler 200 key fob not working.

Step-by-Step Guide to Changing the Battery

Here’s a detailed guide to changing the battery in your 2013 Chrysler 300 key fob:

1. Locate the notch: On the back of your key fob, you’ll find a small notch near the key ring.
2. Insert the screwdriver: Carefully insert the flathead screwdriver into the notch.
3. Pry open the fob: Gently twist the screwdriver to separate the two halves of the key fob casing. Be careful not to damage the plastic.
4. Identify the battery: Inside, you’ll see the CR2032 battery.
5. Remove the old battery: Use your screwdriver or fingernail to carefully pry the old battery out of its compartment.
6. Insert the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side faces up.
7. Close the fob: Snap the two halves of the key fob casing back together.

Need to know how to program your Chrysler Town & Country key fob? We have a guide for that: how to program 2015 chrysler town and country key fob.

Testing Your Key Fob

After replacing the battery, test all the key fob functions (locking, unlocking, panic button, remote start if equipped) to ensure it’s working correctly. If you find your Chrysler 200’s key fob isn’t working, check if you can still can you drive a chrysler 200 without the key fob.

Troubleshooting Tips

If your key fob still isn’t working after a battery change, there could be other issues.

• Check the battery: Make sure the new battery is correctly installed and isn’t damaged.
• Try reprogramming: Sometimes, a key fob needs to be reprogrammed after a battery change. Refer to your owner’s manual for instructions.
• Check for other issues: If reprogramming doesn’t work, there could be a problem with the key fob itself or the car’s receiver. In this case, it’s best to consult a qualified automotive locksmith or dealership.

Need information on replacement batteries? See our resource on replacement battery for chrysler key fob.

Curious about opening your Chrysler Town & Country key fob? Here’s how: opening a chrysler town and country key fob.

Conclusion: Keeping Your 2013 Chrysler 300 Key Fob in Top Condition

Changing the battery in your 2013 Chrysler 300 key fob is a quick and easy task that can save you the hassle of dealing with a malfunctioning fob. By following the steps outlined in this guide, you can maintain your key fob’s functionality and ensure seamless access to your vehicle.

FAQ

1. How long does a Chrysler 300 key fob battery last? Typically, a key fob battery lasts between 3-5 years.

2. What type of battery does a 2013 Chrysler 300 key fob use? A CR2032 battery.

3. Do I need to reprogram my key fob after changing the battery? Usually, no. However, in some cases, reprogramming may be necessary.

4. Where can I buy a replacement battery? CR2032 batteries are widely available at most drugstores, electronics stores, and online retailers.

5. What if my key fob still doesn’t work after changing the battery? Try reprogramming the key fob. If that doesn’t work, consult a locksmith or dealership.

6. Can I damage my key fob by changing the battery myself? It’s unlikely, as long as you are careful when prying open the casing.

7. What tools do I need to change the battery? A small flathead screwdriver is usually sufficient.

Need help?

Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.