How to Replace 2019 Jeep Cherokee Key Fob Battery

Replacing the battery in your 2019 Jeep Cherokee key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved in How To Replace 2019 Jeep Cherokee Key Fob Battery so you can get back on the road in no time.

Understanding Your Jeep Cherokee Key Fob

Before we dive into the replacement process, it’s helpful to understand the different types of key fobs for the 2019 Jeep Cherokee. There are two main types: the standard key fob and the keyless entry remote. Both have batteries that need replacing eventually. Knowing which one you have will make finding the correct replacement battery easier.

The signs of a dying key fob battery are usually pretty obvious. You might notice a decreased range, meaning you have to be closer to your vehicle for the fob to work. The locks might respond sluggishly or intermittently. Or, in the worst-case scenario, your key fob might stop working altogether.

Gathering the Necessary Tools

To replace your 2019 Jeep Cherokee key fob battery, you’ll need a few simple tools:

A small flathead screwdriver or a similar tool for prying open the fob.
A new CR2032 battery. This is the most common battery type for Jeep Cherokee key fobs. You can find these at most electronics stores, pharmacies, and online. It’s a good idea to double-check your owner’s manual to confirm the correct battery type.
A soft cloth or microfiber towel to protect the key fob from scratches.

Step-by-Step Guide on How to Replace 2019 Jeep Cherokee Key Fob Battery

Here’s a step-by-step guide on how to replace 2019 Jeep Cherokee key fob battery:

Locate the release notch: Look for a small notch or indentation on the side of your key fob. This is where you’ll insert your flathead screwdriver. Be gentle, as you don’t want to damage the fob casing.
Carefully pry open the fob: Insert the flathead screwdriver into the notch and gently twist to separate the two halves of the key fob. You may hear a slight click as the halves separate. 2008 jeep wrangler key fob battery replacement
Identify the old battery: Once the fob is open, you should easily see the old CR2032 battery. Take note of its orientation.
Remove the old battery: Gently pry the old battery out using your flathead screwdriver or fingernail. Be careful not to damage the battery contacts.
Install the new battery: Insert the new CR2032 battery, making sure it’s oriented the same way as the old battery. Press down firmly until it clicks into place.
Reassemble the key fob: Align the two halves of the key fob and press them together until they snap shut.
Test the key fob: Try locking and unlocking your Jeep Cherokee to ensure the new battery is working properly.

Troubleshooting Common Issues

Sometimes, even after replacing the battery, your key fob might not work. Here are a few troubleshooting tips:

Check the battery orientation: Make sure the new battery is installed correctly with the positive (+) side facing up.
Clean the battery contacts: If the contacts are dirty or corroded, clean them with a cotton swab and rubbing alcohol.
Try reprogramming the key fob: In rare cases, you may need to reprogram your key fob to your Jeep Cherokee. Consult your owner’s manual for instructions on how to do this. 2005 jeep grand cherokee superman key fob
Consider a replacement key fob: If none of these steps work, your key fob itself might be faulty and require replacement.

“A common mistake people make is not paying attention to the battery orientation,” says John Smith, a certified automotive technician with over 20 years of experience. “Make sure the positive side is facing up!”

Conclusion

Replacing your 2019 Jeep Cherokee key fob battery is a simple task that you can do yourself in just a few minutes. By following these steps, you can save yourself the trip to the dealership and keep your Jeep Cherokee running smoothly. Remember to always double-check the battery type and orientation for optimal performance. 1999 jeep grand cherokee key fob programming

FAQ

What type of battery does the 2019 Jeep Cherokee key fob use? Typically a CR2032.
How long does a Jeep Cherokee key fob battery last? Generally 3-5 years.
Can I replace the battery myself? Yes, it’s a simple process.
What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, clean the contacts, or try reprogramming the key fob. 2005 jeep key fob cover
Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers.
How do I know if my key fob battery is low? Decreased range, sluggish response, or the fob not working at all.
Can I damage my key fob by replacing the battery myself? It’s unlikely if you follow the instructions carefully.

Common Situations and Questions

Key fob works intermittently: This could be due to a dying battery, interference, or a faulty key fob.
Key fob stopped working completely: Try replacing the battery. If that doesn’t work, the key fob may need to be replaced or reprogrammed.
Key fob has reduced range: This is a classic sign of a low battery. 2004 jeep grand cherokee key fob intermittent

More Helpful Resources

Check our articles on other Jeep models for key fob battery replacement guides.
Learn more about Key Fob Programming and other related services.

For further assistance, please contact us via Whatsapp: +1 (641) 206-8880 or visit our location at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team ready to help.