Subaru Key Fob Battery 2014 Forester: A Comprehensive Guide

Replacing the Subaru Key Fob Battery 2014 Forester is a simple task that most car owners can handle themselves. This guide will walk you through the process, troubleshoot common issues, and provide helpful tips for maintaining your key fob. where is battery in 2014 subaru forester key fob

Locating the Battery Compartment in Your 2014 Subaru Forester Key Fob

Before you can replace the battery, you’ll need to find the battery compartment. Most Subaru Forester key fobs from 2014 have a small release button on the side. Pressing this button will allow you to separate the two halves of the key fob and access the battery. Sometimes, a small flathead screwdriver might be needed to gently pry open the compartment.

What Battery Size for Subaru Key Fob? Identifying the Correct Battery

Your 2014 Subaru Forester key fob likely uses a CR2032 battery. This is a common type of lithium coin cell battery, readily available at most stores that sell batteries. Always double-check the existing battery in your key fob to confirm the correct size before purchasing a replacement. battery size for subaru key fob

Step-by-Step Guide: Replacing the Subaru Key Fob Battery 2014 Forester

  1. Locate the release button: Find the small release button on the side of your key fob.
  2. Separate the key fob halves: Press the release button and gently separate the two halves of the key fob.
  3. Identify the battery: Note the type and size of the battery currently in the key fob.
  4. Remove the old battery: Carefully remove the old battery. You may need a small flathead screwdriver to gently pry it out.
  5. Insert the new battery: Insert the new CR2032 battery, making sure the positive (+) side is facing upwards, as indicated in the battery compartment.
  6. Reassemble the key fob: Snap the two halves of the key fob back together.
  7. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Troubleshooting Common Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work correctly. Here are a few common issues and how to resolve them:

  • Key fob still not working: Double-check that you installed the new battery correctly and that it’s making proper contact. Try a different new battery to rule out a faulty battery. 2008 subaru forester key fob battery
  • Intermittent operation: If your key fob works sometimes but not others, the battery contacts might be dirty or corroded. Clean them with a cotton swab and rubbing alcohol.
  • Specific buttons not working: If only certain buttons on your key fob are not working, it could be a problem with the button itself. You may need to have the key fob repaired or replaced. subaru key fob lock button not working

“A common mistake people make is installing the battery incorrectly. Always double-check the polarity,” advises John Smith, Senior Automotive Technician at Smith Auto Repair.

Maintaining Your Subaru Key Fob

Proper maintenance can extend the life of your Subaru key fob. Avoid dropping it or exposing it to extreme temperatures. Keep it clean and dry. “Protecting your key fob from physical damage and moisture can significantly increase its lifespan,” says Sarah Jones, an Electronics Engineer at Jones Automotive Electronics.

Conclusion

Replacing your subaru key fob battery 2014 forester is a quick and easy process that can save you time and money. By following this guide, you can easily maintain your key fob and keep it working like new. subaru key fob battery replacement cost

FAQ

  1. How long does a Subaru key fob battery typically last? Typically 2-3 years.
  2. Can I use any brand of CR2032 battery? Yes, most brands will work.
  3. What if I replace the battery and the key fob still doesn’t work? Check the battery installation or consider key fob repair.
  4. How much does it cost to replace a Subaru key fob battery at a dealership? It varies but is generally more expensive than doing it yourself.
  5. Can I program a new key fob myself? It depends on the model and year. Some require specialized equipment.
  6. What are some signs that my key fob battery is low? Decreased range, intermittent operation, and dim indicator lights.
  7. Where can I purchase a replacement CR2032 battery? Most stores that sell batteries, including pharmacies and supermarkets.

Common Situations and Questions:

Scenario: My key fob works intermittently.
Question: Could this be a battery issue even if it’s relatively new?

Scenario: My key fob completely stopped working.
Question: What are the steps to troubleshoot this?

Scenario: Only the lock button on my key fob is working.
Question: Is this a battery problem or something else?

Further Assistance

For more information on Subaru key fob maintenance and repair, visit our other helpful articles on KEYFOBPROG.

Need help with your Subaru key fob? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our 24/7 customer service team is ready to assist you.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *