Is your 2018 Volvo S90 key fob acting up? Before you schedule a costly trip to the dealership, the culprit might be a simple battery issue. This guide provides a step-by-step walkthrough of how to replace the battery in your 2018 Volvo S90 key fob, saving you time and money.
Understanding Your Key Fob
Your Volvo S90 key fob is a sophisticated piece of technology that allows you to lock, unlock, and even start your car remotely. Like all electronic devices, it relies on a battery to function. Over time, this battery will naturally drain and eventually need replacing.
Signs of a Dying Key Fob Battery
Recognizing the signs of a dying key fob battery can save you a lot of frustration. Here are a few telltale signs:
- Decreased Range: You might find yourself having to stand closer to your car for the key fob to work.
- Intermittent Functionality: The key fob might work sometimes and not others, leading to inconsistent locking and unlocking.
- Warning Messages: Your Volvo S90 might display warning messages on the dashboard, such as “Key Battery Low.”
2018 Volvo S90 Key Fob Battery Replacement: A Step-by-Step Guide
Replacing the battery in your 2018 Volvo S90 key fob is a straightforward process that can be done in a matter of minutes. Here’s what you’ll need:
- A new CR2032 battery
- A small flat-head screwdriver
- A plastic pry tool or your fingernail
Step 1: Access the Battery Compartment
Turn your key fob over and locate the small release button on the back. Gently press the button while sliding the key blade out of the fob. This will separate the two halves of the key fob.
Volvo S90 key fob back view
Step 2: Remove the Old Battery
Inside the key fob, you’ll see the battery housed in a compartment. Carefully pry out the old battery using a small flat-head screwdriver or a plastic pry tool. Avoid using excessive force, as this could damage the key fob.
Step 3: Install the New Battery
Insert the new CR2032 battery into the compartment, making sure the positive (+) side faces up. You should hear a small click when the battery is properly seated.
Replacing the battery in a Volvo S90 key fob
Step 4: Reassemble the Key Fob
Align the two halves of the key fob and press them together until you hear a click. This indicates that the key fob is securely closed. Finally, slide the key blade back into its slot.
Step 5: Test the Key Fob
Test all the buttons on your key fob to ensure they are working properly. If everything is functioning as it should, you have successfully replaced the battery in your 2018 Volvo S90 key fob.
Expert Insights
“Many car owners rush to the dealership for simple fixes like a key fob battery replacement,” says John Smith, Senior Automotive Electrician at Keyfobprog. “With a little guidance, these are tasks you can easily handle yourself at home.”
He adds, “Always refer to your owner’s manual for specific instructions for your car model. If you’re unsure about any step, it’s always best to consult a professional.”
Volvo S90 key fob with car in background
Conclusion
Replacing the battery in your 2018 Volvo S90 key fob is a quick and easy process that can save you both time and money. By following these simple steps, you can get your key fob working like new again in just a few minutes.
If you have any further questions or need assistance with Key Fob Programming, don’t hesitate to contact the experts at Keyfobprog at +1 (641) 206-8880. You can also visit our office located at 1326 N Houston St, Amarillo, TX 79107, USA.
Leave a Reply