Replacing the 2016 Subaru Legacy Key Fob Battery is a simple task that can save you time and money. This guide will walk you through the process, troubleshoot common issues, and provide expert advice to keep your key fob working perfectly.
Why is My 2016 Subaru Legacy Key Fob Not Working?
There are several reasons why your key fob might be malfunctioning. The most common culprit is a dead battery. Other potential issues include a faulty key fob, programming problems, or even interference from other electronic devices. Recognizing the symptoms of a dying battery is crucial.
Signs of a Dying Key Fob Battery
- Reduced Range: You might notice that you need to be much closer to your car for the key fob to work.
- Intermittent Function: The key fob might work sometimes and not others.
- No Response: The car doesn’t respond to any button presses on the key fob.
“A weak key fob battery can lead to frustrating lockouts,” says automotive electronics expert, John Miller, “Regularly checking and replacing your key fob battery can prevent these inconveniences.”
Replacing the 2016 Subaru Legacy Key Fob Battery: A Step-by-Step Guide
Here’s a detailed guide to help you replace your 2016 Subaru Legacy key fob battery:
- Locate the Release Button: Look for a small release button or notch on the key fob. This is usually on the back or side. 2016 subaru legacy key fob battery replacement
- Open the Key Fob: Use a small flathead screwdriver or your fingernail to gently pry open the key fob along the seam indicated by the release button. Be careful not to damage the casing.
- Identify the Battery: Locate the small, round, flat battery inside the key fob. It’s typically a CR2032 or similar type.
- Remove the Old Battery: Carefully remove the old battery using your fingernail or a small, non-metallic tool. Avoid using metal tools to prevent shorting the battery.
- Install the New Battery: Insert the new battery, making sure the positive (+) side is facing up, as indicated in the key fob compartment.
- Close the Key Fob: Snap the two halves of the key fob back together securely.
2017 subaru legacy key fob programming
Troubleshooting Key Fob Issues
If your key fob still isn’t working after replacing the battery, here are a few things to check:
- Check the Battery: Make sure the new battery is properly installed and not damaged.
- Try Reprogramming: In some cases, you might need to reprogram the key fob after replacing the battery. Consult your owner’s manual for instructions.
- Check for Interference: Electronic devices or metal objects can sometimes interfere with the key fob signal. Move away from these objects and try again.
subaru forester key fob battery 2016
“Sometimes, even a new battery isn’t enough,” advises Sarah Johnson, a certified automotive technician. “If your key fob still isn’t working, it’s best to consult a professional.”
2009 subaru forester key fob replacement
Conclusion
Replacing the 2016 Subaru Legacy key fob battery is a quick and easy process. By following this guide, you can save yourself the hassle and expense of a trip to the dealership. Remember to keep a spare battery on hand to avoid unexpected lockouts. 2009 subaru legacy key fob
Need Help? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer service team.
Leave a Reply