If you’re experiencing issues with your 2018 Toyota Yaris Ia Key Fob, you’re not alone. This model year, while generally reliable, has been known to have some key fob quirks. Whether your key fob is completely unresponsive or you’re just looking to have a spare programmed, this guide will take you through everything you need to know about 2018 Toyota Yaris iA Key Fob Programming and replacement.
Common 2018 Toyota Yaris iA Key Fob Issues
Before jumping into solutions, it’s helpful to pinpoint the problem. Here are some common issues 2018 Yaris iA owners face:
- Key Fob Won’t Unlock/Lock Doors: This could be due to a dead battery in the fob, a weak signal, or a problem with the car’s receiver.
- Key Fob Won’t Start the Car: This is often caused by a dead key fob battery or a problem with the immobilizer system.
- Key Fob Buttons Don’t Work: Worn-out buttons (from frequent use) can become unresponsive.
2018 Toyota Yaris iA Key Fob Battery Replacement
DIY: How to Replace Your 2018 Toyota Yaris iA Key Fob Battery
A dead battery is the most common culprit for key fob malfunction. Here’s how to replace it yourself:
- Identify the Battery Type: The 2018 Yaris iA key fob typically uses a CR2032 battery.
- Open the Key Fob: Locate the small release tab or notch on the fob. Use a small flathead screwdriver or a fingernail to pry open the fob casing.
- Remove the Old Battery: Carefully remove the old battery from its compartment. Note the battery’s orientation.
- Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring it matches the same orientation as the old battery.
- Reassemble the Key Fob: Align the two halves of the key fob and press them together until you hear a click.
Programming a New 2018 Toyota Yaris iA Key Fob
If you need to program a new or replacement key fob to your 2018 Yaris iA, you can often do it yourself without a trip to the dealership. However, not all 2018 Yaris iA models allow for DIY programming. If you’re unsure, consult your owner’s manual or contact a Toyota dealership.
General DIY Programming Instructions:
While specific instructions can vary, here’s a general overview of the DIY programming process for many Toyota models. It’s essential to consult your owner’s manual for the exact procedure for your 2018 Yaris iA:
- Gather Your Materials: You’ll need all existing working key fobs and the new, unprogrammed key fob.
- Enter Programming Mode: This usually involves a sequence of actions like turning the ignition on and off, opening and closing the driver’s door, or pressing specific buttons on the working key fob.
- Program the New Key Fob: While the car is in programming mode, there’s typically a timed step to program the new key fob. This often involves pressing buttons on the new fob or inserting and removing it from the ignition.
- Exit Programming Mode: Once the new key fob is programmed, you’ll need to exit programming mode, which usually involves another sequence of actions similar to entering it.
“I Followed the Steps, But My Key Fob Still Doesn’t Work!”
If you’ve followed the DIY steps and your key fob isn’t cooperating, there are a few things to check:
- Battery: Ensure the new key fob battery is fresh and installed correctly.
- Signal Interference: Electronic devices, like cell phones or other key fobs, can interfere with the signal. Move away from potential interference sources.
- Immobilizer System: An issue with the car’s immobilizer system (which verifies the key fob’s authorization) might require professional attention.
When to Seek Professional Help
While some key fob issues have simple fixes, others may require a trip to a dealership or qualified automotive locksmith. Here’s when professional help is recommended:
- DIY Programming Fails: If you’ve exhausted all DIY programming attempts, a professional likely has the diagnostic tools to pinpoint the issue.
- Immobilizer System Problems: Issues with the immobilizer system typically require specialized tools and knowledge to diagnose and repair.
- Lost or Damaged Key Fobs: If you’ve lost all your key fobs or have a physically damaged one, a professional can cut and program a new key from scratch.
Finding a Reputable Professional
When seeking professional help, ensure you choose a trustworthy provider. Look for certified automotive locksmiths or contact your local Toyota dealership.
2018 Toyota Yaris iA Key Fob FAQs
Q: How much does it cost to replace a 2018 Toyota Yaris iA key fob?
A: The cost for a replacement 2018 Toyota Yaris iA key fob can vary depending on where you purchase it and whether it needs to be programmed. Expect to pay between $50 to $200 for the fob itself. Programming costs, if necessary, can range from $50 to $150.
Q: Can I program a used 2018 Toyota Yaris iA key fob to my car?
A: It’s usually not possible to program a used key fob that was previously programmed to a different vehicle. The immobilizer system in your Yaris iA is designed to recognize only the key fobs that were originally programmed to it.
Q: What is the range of a 2018 Toyota Yaris iA key fob?
A: The key fob’s range can vary depending on environmental factors like signal interference, but it’s generally around 30 to 50 feet.
Q: My 2018 Toyota Yaris iA key fob battery keeps dying quickly. What could be wrong?
A: If your key fob battery drains rapidly, it could be a sign of a short circuit in the fob, a faulty battery connection, or a problem with the car’s receiver constantly searching for the fob’s signal.
Need More Help with Your 2018 Toyota Yaris iA Key Fob?
We understand that dealing with key fob issues can be frustrating. If you need assistance programming your 2018 Toyota Yaris iA key fob, our team at KEYFOBPROG is here to help. Contact us via Whatsapp at +1 (641) 206-8880 or visit our shop at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7 to answer any questions and provide expert guidance.
Leave a Reply