How to Replace Coin Battery in Honda 2015 Key Fob

Is your Honda 2015 key fob acting up? Before you shell out big bucks at the dealership, it might be a simple fix like replacing the coin battery. This guide will walk you through the process step-by-step.

You don’t need to be a mechanic to tackle this task. With a few common household tools and a few minutes of your time, you can save money and have your key fob working like new again.

What You’ll Need:

• A brand new CR2032 battery: These are commonly found at grocery stores, pharmacies, and online.
• A small flathead screwdriver: A precision screwdriver set is ideal, but any small flathead will do.
• Your Honda 2015 key fob: Sounds obvious, but we all need reminders sometimes!

Step-by-Step Guide:

1. Locate the release button: On the back of your Honda key fob, you’ll find a small release button. This button releases the metal key from the fob.

2. Release the metal key: Gently press the release button and carefully slide the metal key out of the fob.

3. Identify the battery compartment: With the metal key removed, you’ll see a small slot or indentation where the key was inserted. This is where the battery compartment is located.

4. Open the battery compartment: Insert the flathead screwdriver into the slot and gently pry open the battery compartment cover. Be careful not to use excessive force, as this could damage the fob. The cover should pop open with minimal pressure.

5. Remove the old battery: Once the compartment is open, you’ll see the CR2032 battery. Gently pry it out using your fingernail or the flathead screwdriver. Pay attention to the orientation of the battery, as the new one will need to be inserted the same way.

6. Install the new battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side is facing up. You should hear a slight click when the battery is properly seated.

7. Close the battery compartment: Align the cover and press it firmly until you hear it snap back into place. Ensure the cover is flush with the rest of the fob.

8. Test the key fob: Try locking and unlocking your car doors using the key fob buttons. If everything works as expected, congratulations, you’ve successfully replaced your Honda key fob battery!

Frequently Asked Questions:

Q: How often should I replace my Honda key fob battery?

A: Honda recommends replacing your key fob battery every 2-3 years, or sooner if you notice the buttons becoming less responsive.

Q: Can I use any CR2032 battery?

A: While any CR2032 battery will technically work, it’s always best to use a high-quality battery from a reputable brand for optimal performance and longevity.

Q: What if I replace the battery and my key fob still doesn’t work?

A: If replacing the battery doesn’t resolve the issue, there may be a problem with the key fob itself, such as a damaged circuit board. In this case, you may need to consult a qualified automotive locksmith or your Honda dealership.

Still Having Trouble?

We’re here to help! If you’ve followed these steps and are still experiencing issues with your Honda 2015 key fob, don’t hesitate to reach out to our expert team at KEYFOBPROG.

Contact us via WhatsApp: +1 (641) 206-8880

Visit us at: 1326 N Houston St, Amarillo, TX 79107, USA

Our 24/7 customer support team is standing by to assist you with any Key Fob Programming or replacement needs.