Tools for Genesis G70 key fob battery replacement

2020 Genesis G70 Key Fob Battery Replacement: A Comprehensive Guide

Having trouble with your 2020 Genesis G70 key fob? A dead battery is one of the most common culprits. Luckily, replacing it is a simple process you can do yourself in minutes. This guide provides a step-by-step walkthrough, helpful tips, and answers to frequently asked questions.

Recognizing a Dying Key Fob Battery

Before you start digging for tools, ensure your key fob battery is the issue. Here are a few telltale signs:

  • Decreased Range: You need to be unusually close to your car for the key fob to work.
  • Intermittent Functioning: The key fob works sporadically, even when standing near the car.
  • Warning Light: Your Genesis G70 might display a “Key Fob Battery Low” warning on the dashboard.

What You’ll Need for the Replacement

Gather these simple tools before you begin:

  • A new CR2032 battery: Easily found at most stores that sell batteries.
  • A small flat-head screwdriver: To pry open the key fob casing.

Tools for Genesis G70 key fob battery replacementTools for Genesis G70 key fob battery replacement

Step-by-Step Battery Replacement Guide

Follow these straightforward steps to replace your 2020 Genesis G70 key fob battery:

  1. Locate the release button: On the back of your key fob, find a small button or notch.
  2. Release the metal key: Press the release button and gently slide out the metal key.
  3. Separate the key fob halves: Use the flat-head screwdriver to carefully pry open the key fob casing along the seam.
  4. Remove the old battery: Gently lift out the old CR2032 battery. Avoid touching the battery terminals.
  5. Install the new battery: Place the new CR2032 battery in the compartment, ensuring the positive (+) side faces up.
  6. Reassemble the key fob: Align the two halves of the casing and press firmly together until you hear a click.
  7. Reinsert the metal key: Slide the metal key back into its slot until it locks.
  8. Test the key fob: Verify that all buttons function properly, including locking, unlocking, and starting the engine.

Installing the new battery in a Genesis G70 key fobInstalling the new battery in a Genesis G70 key fob

Expert Tips for a Smooth Replacement

  • Work in a well-lit area: Good lighting helps you see the small components clearly.
  • Avoid excessive force: Be gentle when prying open the casing to prevent damage.
  • Handle the new battery with care: Avoid touching the battery terminals to prevent discharge.
  • Dispose of the old battery properly: Take it to a designated battery recycling center.

“Many car owners don’t realize how easy it is to replace their key fob battery,” says John Miller, Senior Automotive Technician at Keyfobprog. “A simple DIY replacement can save you time and money compared to visiting a dealership.”

Troubleshooting

If your key fob still doesn’t work after replacing the battery, don’t panic. Here are a few possibilities:

  • Improper battery installation: Double-check that the new battery is correctly positioned with the positive (+) side facing up.
  • Key Fob Programming: In rare cases, you might need to reprogram your key fob to your Genesis G70. Refer to your owner’s manual for instructions, or contact a qualified automotive locksmith.

Genesis G70 key fob programming using a diagnostic toolGenesis G70 key fob programming using a diagnostic tool

Key Fob Battery Replacement: FAQs

Q: How long does a Genesis G70 key fob battery last?
A: Typically, a Genesis G70 key fob battery lasts between 3 to 5 years, depending on usage.

Q: Can I use any CR2032 battery?
A: While any reputable brand of CR2032 battery should work, it’s best to use a high-quality battery for optimal performance and lifespan.

Q: What if I’m not comfortable replacing the battery myself?
A: You can always visit a dealership or a qualified automotive locksmith for assistance.

Need Further Assistance?

For all your 2020 Genesis G70 key fob needs, contact the experts at Keyfobprog. We offer comprehensive key fob services, including battery replacement, programming, and repair.

Contact us today at +1 (641) 206-8880 or visit our office at 1326 N Houston St, Amarillo, TX 79107, USA. We are here to help!


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *