Is your 2006 Gmc Sierra Key Fob no longer working, or did you recently purchase a replacement? Luckily, programming a new or existing key fob for your 2006 GMC Sierra is a straightforward process you can complete yourself at home. This guide will provide you with clear, step-by-step instructions to get your key fob working again in no time.
Programming Your 2006 GMC Sierra Key Fob: Step-by-Step Instructions
Before you begin, ensure you have all the key fobs you wish to program with you. This procedure will erase all previously programmed remotes, so you must reprogram all of them at once.
-
Prepare Your Vehicle: Close all doors on your 2006 GMC Sierra. Insert your key into the ignition, but do not turn it on yet.
-
Engage Programming Mode: Press and hold the “UNLOCK” button located on the driver’s side door. Do not release the button.
-
Cycle the Ignition: While holding the “UNLOCK” button, quickly turn the ignition key from the “ON” position to the “OFF” position twice. “ON” is the position right before starting the engine, and “OFF” is where you can remove the key.
-
Release the Unlock Button: Release the “UNLOCK” button. If you have successfully entered programming mode, the door locks will cycle from lock to unlock automatically. This indicates the vehicle is ready to learn the new key fobs.
- Troubleshooting: If the locks cycle before you release the unlock button, the programming mode has not been activated. Return to step one and repeat the process carefully. If the locks continue to cycle prematurely, double-check that you are following the steps correctly, or there may be an issue with your vehicle’s keyless entry system.
-
Program Your Key Fob: Take the first key fob you want to program. Simultaneously press and hold both the “LOCK” and “UNLOCK” buttons on the fob. Continue holding both buttons until the vehicle responds by cycling the door locks again. This may take up to 5 minutes when programming a new, unprogrammed remote. A previously paired remote will typically program more quickly.
-
Program Additional Key Fobs: Repeat step 5 for each additional or existing key fob you want to use with your 2006 GMC Sierra.
-
Exit Programming Mode: Turn the ignition key to the “ON” position. This will exit the programming mode.
-
Test Your Key Fobs: Programming is now complete. Remove the key from the ignition and test all of your programmed key fobs to ensure they are working correctly.
Need Professional Key Fob Programming Assistance?
If you encounter difficulties programming your 2006 GMC Sierra key fob, or simply prefer professional assistance, you can locate a qualified key fob installer in your area. [Search for a professional key fob installer near you.]
By following these instructions, you can easily program your 2006 GMC Sierra key fob and regain full keyless entry functionality.
