If your 2011 Subaru Legacy key fob is acting up, a dead battery might be the culprit. Replacing the Battery For 2011 Subaru Legacy Key Fob is a quick and easy fix that you can often do yourself, saving you a trip to the dealership. This guide will walk you through everything you need to know about your 2011 Subaru Legacy key fob battery, from identifying the right replacement to the step-by-step installation process.
Identifying the Right Battery for Your 2011 Subaru Legacy Key Fob
Before you start, you’ll need to know the correct battery type for your 2011 Subaru Legacy key fob. The correct battery is a CR2032 3V lithium coin battery. These are readily available at most electronics stores, pharmacies, and online retailers. Don’t be tempted to use a different type of battery, as it may not fit or provide the correct voltage.
CR2032 Battery for 2011 Subaru Legacy Key Fob
How to Replace the Battery in Your 2011 Subaru Legacy Key Fob
Replacing the battery in your 2011 Subaru Legacy key fob is straightforward and requires only a few simple tools. You’ll need a small flathead screwdriver or a key. Here’s a step-by-step guide:
- Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the metal emergency key.
- Use the emergency key: Insert the tip of the emergency key (or a small flathead screwdriver) into the slot revealed after removing the metal key. Gently pry open the key fob casing. Be careful not to damage the plastic.
- Remove the old battery: Once the key fob is open, you should see the CR2032 battery. Carefully pry it out using your screwdriver or fingernail. Pay attention to the orientation of the battery.
- Install the new battery: Insert the new CR2032 battery, making sure the positive (+) side faces up, the same way the old battery was positioned.
- Close the key fob: Snap the two halves of the key fob back together. You should hear a click when it closes securely.
- Reinsert the emergency key: Slide the emergency key back into its slot.
What if My Key Fob Still Doesn’t Work?
If you’ve replaced the battery and your key fob still isn’t working, there could be other issues at play. The key fob might need to be reprogrammed, or there might be a problem with the car’s receiver. In these cases, it’s best to consult a qualified automotive locksmith or your Subaru dealership.
Why Choose KEYFOBPROG for Your Key Fob Needs?
At KEYFOBPROG, we specialize in automotive key fob programming and replacement. Our expert technicians have years of experience working with all makes and models, including Subaru. We offer a wide range of services, from battery replacement to complex key fob programming, and we’re committed to providing top-quality service at competitive prices.
Common Issues with Subaru Key Fobs
Some common issues with Subaru key fobs, beyond a dead battery, include accidental button presses in pockets or purses leading to premature battery drain, physical damage from drops or impacts, and occasionally, internal component failure.
In conclusion, replacing the battery for 2011 Subaru Legacy key fob is a simple task that most car owners can handle themselves. However, if you’re unsure or encounter any problems, KEYFOBPROG is here to help. We provide expert key fob services, ensuring you’re back on the road with a fully functional key fob in no time.
FAQs
-
How long does a 2011 Subaru Legacy key fob battery last? Typically, a CR2032 battery in a key fob lasts between 2 to 5 years.
-
Can I use any CR2032 battery? Yes, any brand of CR2032 3V lithium coin battery will work.
-
What if I replace the battery and the key fob still doesn’t work? You may need to reprogram the key fob or there could be a problem with your car’s receiver. Consult a professional.
-
How much does it cost to replace a Subaru key fob battery at a dealership? Dealership prices vary but are generally higher than replacing the battery yourself.
-
Can I damage my key fob by replacing the battery myself? It’s possible to damage the key fob if you’re not careful. Follow the instructions carefully and use the proper tools.
-
Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers carry them.
-
How do I know if my key fob battery is dead? The most common sign is that the key fob buttons stop working or become less responsive.
Subaru Key Fob Troubleshooting Guide
Other helpful articles on our website:
- Subaru Key Fob Programming Guide
- Common Car Key Problems and Solutions
- Understanding Your Car’s Security System
Need help with your Subaru key fob? Contact us via Whatsapp: +1 (641) 206-8880 Or visit our store: 1326 N Houston St, Amarillo, TX 79107, USA. We offer 24/7 customer support.
Leave a Reply