Lost your 2009 Chevy Impala key fob or need to program a new replacement? You’re in the right place. Programming your key fob for a 2009 Chevrolet Impala can often be done right at home without special tools. This guide provides straightforward, step-by-step instructions for programming your 2009 Impala Key Fob, whether your vehicle is equipped with a driver information center (DIC) or not.
Procedure 1: Programming with Driver Information Center (DIC)
If your 2009 Impala has a driver information center, you’ll find buttons on your steering wheel, one of which is marked with an “i” symbol. Using the DIC makes the key fob programming process quite user-friendly. Here’s how to do it:
-
Ignition On: Insert your key into the ignition and turn it to the “On” position. Do not start the engine.
-
Access Relearn Remote Key: Press the Information button (the “i” button) repeatedly until you see “Relearn Remote Key” displayed on the DIC screen.
-
Initiate Learning Mode: Press and hold the Set/Reset button (often marked with a checkmark) until the DIC displays “Remote Key Learning Active.” The vehicle is now ready to learn the key fob signal.
-
Program Key Fob: Immediately press and hold both the Lock and Unlock buttons on the key fob you are programming. Hold them until the vehicle chimes twice. This chime confirms successful programming of that key fob.
-
Program Additional Remotes (if needed): If you have more key fobs to program, including existing ones, repeat step 4 for each. It’s crucial to program all remotes you intend to use at this time, as the system typically clears previous programming.
-
Exit Programming Mode: Turn the ignition key to the “Off” position. This will exit the key fob programming mode.
Procedure 2: Programming Without Driver Information Center (DIC)
For 2009 Impala models that are not equipped with a driver information center, the programming process is slightly different but still manageable. Follow these steps:
-
Ignition On: Insert the key into the ignition and turn it to the “On” position, just as in Procedure 1. Do not start the car.
-
Access Relearn Remote Key: Press and release the trip odometer reset button located on the instrument panel cluster until you see “Relearn Remote Key” displayed (this will appear in the area where the odometer is usually shown).
-
Initiate Learning Mode: Press and hold the trip odometer reset button again until “Remote Key Learning Active” is displayed. The vehicle is now in learning mode.
-
Program Key Fob: Press and hold the Lock and Unlock buttons simultaneously on the key fob you are programming until the vehicle chimes twice. This indicates successful programming of the remote.
-
Program Additional Remotes (if needed): Repeat step 4 for every key fob you need to program, including any previously working remotes. All remotes must be programmed in this session to function correctly.
-
Exit Programming Mode: Turn the ignition key to the “Off” position to exit the programming sequence.
Important Note: If you encounter any issues or find that some of your remotes stop working after programming, double-check that you have reprogrammed all of your remotes during step 4 of the relevant procedure. The system often requires all intended remotes to be programmed in a single session.
If you are still having trouble programming your 2009 Impala key fob or prefer professional assistance, consider searching online for a local key fob programming service in your area. They can offer expert help to get you back on the road quickly.
