DIY Guide: Programming Your 2006 Pontiac Vibe Key Fob

Is your 2006 Pontiac Vibe Key Fob malfunctioning or did you recently replace it? Luckily, programming a new key fob for your Pontiac Vibe can be done right at home without the need for expensive dealership services. This step-by-step guide will walk you through the process of programming your 2006 Pontiac Vibe keyless entry remote, saving you time and money.

Follow these instructions carefully to successfully program your 2006 Pontiac Vibe key fob:

  1. Begin by ensuring your key is removed from the ignition. The driver’s side door should be open, while all other doors are closed and locked. Make sure the driver’s door is unlocked.

  2. Within 5 seconds, perform the following actions twice:
    a. Insert the ignition key into the ignition switch (do not turn it).
    b. Immediately remove the key from the ignition.

  3. Within 40 seconds, complete these steps:
    a. Close and then open the driver’s side door.
    b. Close and then open the driver’s side door again.
    c. Insert the key into the ignition switch (do not turn it).
    d. Remove the key from the ignition switch.

  4. Within 40 seconds, proceed with these actions:
    a. Close and then open the driver’s side door.
    b. Close and then open the driver’s side door again.
    c. Insert the key into the ignition and leave it in the ignition switch this time.
    d. Close the driver’s door.
    e. Turn the ignition to the ON position (do not start the engine) and then turn it back to the OFF position.
    f. Remove the key from the ignition.

  5. Within 3 seconds of removing the key, the power door locks should automatically cycle (lock then unlock). This indicates that you have successfully entered the programming mode. If the locks do not cycle, return to step 1 and repeat the process.

  6. Within 40 seconds, program your key fob(s):
    a. Simultaneously press and hold the LOCK and UNLOCK buttons on the remote for about 1.5 seconds.
    b. Immediately after releasing both buttons, press and hold the LOCK button alone for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once to confirm successful programming of that remote. If the door locks cycle twice, it indicates programming failure for that remote, and you should repeat steps 6a and 6b.
    c. Repeat steps 6a and 6b for each additional 2006 Pontiac Vibe key fob you wish to program.

By following these steps, you should be able to easily program your 2006 Pontiac Vibe key fob and regain full keyless entry functionality. This DIY method is a convenient way to manage your car’s remote programming without incurring unnecessary costs.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *