Is your 2005 Honda Accord key fob not working? Or did you get a new key fob remote and need to program it? Don’t worry, programming your 2005 Honda Accord key fob is a straightforward process you can do yourself at home. This guide provides you with easy-to-follow, step-by-step instructions to get your key fob programmed quickly.
Programming Your 2005 Honda Accord Key Fob – Step-by-Step Instructions
Follow these simple steps to program your 2005 Honda Accord key fob. Remember, it’s crucial to complete each step within 5 seconds of the last to stay in programming mode.
-
Turn the ignition switch to the ON position (II). Do not start the engine, just turn the key to the position right before starting.
-
Press the LOCK or UNLOCK button on the key fob you wish to program. You can use a new, unprogrammed remote for this initial step.
-
Turn the ignition switch to the LOCK position (0), which is the off position.
-
Repeat steps 1, 2, and 3 two more times. Make sure to use the same key fob remote button as in step 2 for these repetitions.
-
Turn the ignition switch back to the ON position (II).
-
Press the LOCK or UNLOCK button on the same key fob remote used in the previous steps. If you have successfully entered programming mode, the power door locks should cycle (lock and then unlock) automatically. This confirms you are ready to program your remotes.
-
For each key fob you want to program, press the LOCK or UNLOCK button. After pressing a button on each remote, the door locks should cycle again, indicating that the system has accepted the remote’s signal.
-
Turn the ignition switch to the LOCK position (0) to exit the key fob programming mode.
-
Test each programmed remote to ensure they are working correctly by pressing the LOCK and UNLOCK buttons and verifying the door locks respond.
Important Notes Before You Begin
- Erase Previous Remotes: Entering programming mode will erase all previously programmed key fobs. Therefore, you must reprogram all of your key fobs at this time, not just new ones.
- Timing is Key: Ensure you complete each step within 5 seconds of the previous one. If you take too long, the system may exit programming mode, and you will need to start over.
- Need a Replacement Key Fob? If you need a new key fob for your 2005 Honda Accord, you can order part number OUCG8D-380H-A from Keylessentryremotefob.com for a compatible and reliable replacement.
By following these instructions, you should be able to easily program your 2005 Honda Accord key fob and regain full remote access to your vehicle. If you encounter any issues, double-check each step and ensure you are within the time limit.
