How to Replace Battery in 2017 Nissan Pathfinder Key Fob

Replacing the battery in your 2017 Nissan Pathfinder key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps, helping you get back on the road in no time. We’ll cover everything from identifying the right battery to properly reassembling your key fob.

Changing the battery in your key fob is a simple DIY task that anyone can handle. No special tools are required and the new battery is inexpensive and readily available at most stores. This guide provides a clear, step-by-step approach, ensuring you can confidently tackle this task yourself. Knowing how to replace the battery can also save you from the inconvenience of a malfunctioning key fob and the potential costs of professional replacement. How much to replace nissan key fob.

Identifying the Right Battery for Your 2017 Nissan Pathfinder Key Fob

The 2017 Nissan Pathfinder key fob uses a CR2032 battery. These are commonly available at electronics stores, pharmacies, and online retailers. It’s always a good idea to have a spare on hand to avoid being stranded with a dead key fob. Double-check your owner’s manual to confirm the correct battery type, especially if you have a model variant.

Tools You’ll Need

The only tool you’ll need is a small flat-head screwdriver or a similar tool to pry open the key fob. Some key fobs have a designated slot for this purpose, while others require a little more careful prying.

Step-by-Step Guide: How to Replace the Battery

1. Locate the release button: On the side of your key fob, find the small release button. This button releases the emergency key blade.
2. Release the key blade: Press the release button and gently slide the emergency key blade out of the key fob.
3. Open the key fob: Using the flat-head screwdriver, carefully insert it into the slot or seam where the key blade was located. Gently pry the two halves of the key fob apart. Be careful not to damage the plastic.
4. Remove the old battery: Locate the CR2032 battery. Using your screwdriver or fingernail, carefully pry the old battery out of its compartment. Note the orientation of the battery for correct replacement.

Nissan Pathfinder Key Fob Open with Battery Exposed

5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing upwards, just like the old battery.
6. Close the key fob: Align the two halves of the key fob and press them firmly together until they click or snap shut.
7. Reinsert the key blade: Slide the emergency key blade back into its slot on the key fob.

Nissan Pathfinder Keyfob Reassembled

Testing the New Battery

After replacing the battery, test all the buttons on your key fob to ensure they are functioning correctly. If any buttons are not working, double-check the battery installation and ensure the key fob is properly closed.

Troubleshooting

If you’re still experiencing issues after replacing the battery, consider these troubleshooting tips:

• Check the battery: Make sure the new battery is fresh and not damaged.
• Clean the contacts: Use a cotton swab and a small amount of rubbing alcohol to clean the battery contacts inside the key fob.
• Key fob battery nissan pathfinder 2017.

“A common mistake people make is not paying attention to the orientation of the battery,” says John Smith, Senior Automotive Technician at XYZ Auto Repair. “Make sure the positive side is facing up for proper connection.”

Conclusion

Replacing the battery in your 2017 Nissan Pathfinder key fob is a simple task that can be completed in a few minutes with minimal tools. By following these steps, you can save yourself the expense of a professional replacement and the inconvenience of a non-functional key fob. Remember to always have a spare CR2032 battery on hand for quick and easy replacement in the future. How To Replace Battery In 2017 Nissan Pathfinder Key Fob is no longer a mystery!

Nissan pathfinder key fob battery 2017.

FAQ

1. What type of battery does a 2017 Nissan Pathfinder key fob use? A CR2032 battery.
2. What tools do I need to replace the battery? A small flat-head screwdriver or similar tool.
3. How often should I replace the key fob battery? Every 2-3 years, or when it starts to malfunction.
4. Can I replace the battery myself? Yes, it’s a simple DIY task.
5. What if my key fob still doesn’t work after replacing the battery? Check the battery installation, clean the contacts, or consult a professional.
6. Where can I buy a replacement CR2032 battery? Most electronics stores, pharmacies, and online retailers.
7. How do I know if my key fob battery is low? The key fob’s range may decrease, or the buttons may become less responsive.

“Always test the key fob’s functionality after replacing the battery,” advises Jane Doe, Certified Automotive Electrician. “This ensures the new battery is installed correctly and the key fob is working properly.”

Other Common Questions and Scenarios:

• Key fob not working at all: Try replacing the battery, checking the battery contacts, or having the key fob reprogrammed.
• Key fob works intermittently: This could also indicate a low battery or a problem with the key fob’s internal circuitry.
• Key fob buttons sticking: Clean the buttons and surrounding area with a soft cloth.

Other Helpful Resources on KEYFOBPROG:

• Check out our article on how much it costs to replace a Nissan key fob.
• Explore other articles about Nissan key fobs and other automotive key programming topics.

Need further assistance? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.