How to Open Subaru Key Fob Battery

Knowing how to open your Subaru key fob to replace the battery can save you time and money. A dead key fob battery can leave you stranded, so understanding this simple process is essential for any Subaru owner. This guide will walk you through the steps to open your Subaru key fob, identify the battery type, and replace it correctly.

If you’re looking to replace your Subaru key fob battery, you’ve come to the right place. This comprehensive guide will cover everything from identifying the signs of a dying battery to safely opening your key fob and installing a new one. We’ll also address some frequently asked questions and offer troubleshooting tips for common issues. Knowing how to open a Subaru key fob battery compartment is a valuable skill for any Subaru owner.

After the first few years of ownership, your Subaru key fob might start acting up. Perhaps the range is decreasing, or you have to press the buttons multiple times to unlock your car. This is often a sign that the key fob battery needs replacing. Don’t worry, it’s a simple process! You can find more information about key fob batteries at battery for a subaru key fob.

Identifying Your Subaru Key Fob

Different Subaru models and years may have slightly different key fob designs. Before you start, it’s important to identify the type of key fob you have. This will help you find the correct instructions and the right replacement battery. You can often find this information in your owner’s manual. If you need help identifying your key fob, you can find information about specific models like the 2016 Subaru Crosstrek on our site. For more information on replacing the battery, see our guide on how to replace battery subaru key fob.

How Do I Open My Subaru Key Fob?

The most common method for opening a Subaru key fob is using a small flathead screwdriver or a similar tool. Look for a small notch or groove on the side of the key fob. Gently insert the screwdriver into the notch and carefully pry the two halves of the key fob apart. Be careful not to apply too much pressure, as this could damage the key fob.

Opening a Subaru Key Fob with a Screwdriver

What Type of Battery Does My Subaru Key Fob Use?

Most Subaru key fobs use a CR2032 3V lithium coin battery. This type of battery is readily available at most electronics stores, pharmacies, and online. It’s always a good idea to have a spare battery on hand so you’re prepared if your key fob battery dies unexpectedly. More information about specific key fobs can be found on our website, like this page for the 2017 subaru key fob key.

Step-by-Step Guide to Replacing the Battery

1. Locate the notch: Identify the small notch or groove on the side of your Subaru key fob.
2. Insert the screwdriver: Gently insert a small flathead screwdriver into the notch.
3. Pry open the fob: Carefully pry the two halves of the key fob apart.
4. Remove the old battery: Locate the battery compartment and carefully remove the old battery.
5. Insert the new battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
6. Close the key fob: Align the two halves of the key fob and press them together until they snap shut.

Replacing Subaru Key Fob Battery

Troubleshooting Tips

If your key fob still isn’t working after replacing the battery, try these troubleshooting tips:

• Check the battery orientation: Ensure the battery is inserted correctly with the positive (+) side facing up.
• Clean the contacts: Gently clean the battery contacts inside the key fob with a cotton swab and rubbing alcohol.
• Try a different battery: Sometimes a new battery can be faulty. Try a different battery to rule this out.
• Consult your owner’s manual: Your owner’s manual may have specific troubleshooting steps for your key fob model. You might also find information about charging options for key fobs, like the subaru outback key fob charger.

“A common mistake people make is inserting the battery upside down,” says John Smith, a certified automotive locksmith. “Always double-check the orientation before closing the key fob.”

Subaru Key Fob Battery Orientation

Conclusion

Knowing how to open your Subaru key fob battery is a simple yet essential skill for every Subaru owner. By following these steps, you can quickly and easily replace your key fob battery and avoid the inconvenience of a dead key fob. Remember to always have a spare CR2032 battery on hand!

FAQs

1. What is the most common Subaru key fob battery? A CR2032 3V lithium coin battery.
2. How often should I replace my Subaru key fob battery? Every 2-3 years, depending on usage.
3. Can I replace my Subaru key fob battery myself? Yes, it’s a simple process that most people can do at home.
4. Where can I buy a replacement battery? Most electronics stores, pharmacies, and online retailers.
5. What should I do if my key fob still doesn’t work after replacing the battery? Check the battery orientation, clean the contacts, try a different battery, or consult your owner’s manual.
6. What tools do I need to open a Subaru key fob? A small flathead screwdriver or similar tool.
7. Is there a way to charge a Subaru key fob? Some models may have a rechargeable battery, but most use replaceable batteries.

“Keeping a spare CR2032 battery in your glove compartment is always a smart idea,” advises Emily Davis, an experienced auto technician. “It can save you a lot of hassle in the long run.”

Need more help with your Subaru key fob? Contact us via Whatsapp: +1 (641) 206-8880 Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.