Have you purchased a new key fob for your 2003 Honda Element and are now scratching your head about programming it? Many dealerships would have you believe that key fob programming is a service only they can provide, often at a hefty cost. However, for the 2003 Honda Element, you can actually program your key fob yourself at home, saving time and money. This guide will walk you through the process to get your new remote working seamlessly with your vehicle.
Programming Your 2003 Honda Element Key Fob – Step-by-Step
Before you begin, ensure you have all the key fobs you intend to use with your vehicle present. This is because entering programming mode will erase all previously programmed remotes, requiring you to reprogram them all. Work quickly, as you need to complete each step within 5 seconds of the last to stay in programming mode.
Here’s how to program your 2003 Honda Element key fob:
-
Turn the ignition to the ON (II) position. This is the position right before you would start the engine. The dashboard lights should be illuminated.
-
Press the LOCK or UNLOCK button on one of your key fobs. It doesn’t matter which button you press, and even an unprogrammed remote can be used for this initial step.
-
Turn the ignition to the LOCK (0) position. This is the position where the car is completely off, and you can remove the key.
-
Repeat steps 1, 2, and 3 two more times. So, you will have cycled the ignition from ON to LOCK and pressed the remote button a total of three times using the same key fob from step 2.
-
Turn the ignition switch to the ON (II) position again.
-
Press the LOCK or UNLOCK button on the same remote used in step 2. If you have successfully entered programming mode, the power door locks should cycle (lock then unlock). This confirms that your Element is ready to learn new key fobs.
-
Press the LOCK or UNLOCK button on each additional key fob you want to program. For each remote, press the button once. The power door locks should cycle after each button press, indicating that the system has accepted the signal from that remote.
-
Turn the ignition switch to the LOCK (0) position to exit programming mode.
-
Test each of your programmed remotes. Press the LOCK and UNLOCK buttons on each key fob to ensure they are working correctly with your 2003 Honda Element.
By following these steps, you should be able to easily program your 2003 Honda Element key fobs without needing to visit a dealership. Enjoy the convenience of your keyless entry system!
