Key fobs provide convenient access and security for your 2006 Jeep Commander, but losing or needing an extra one can be a hassle. Fortunately, programming a new key fob for your 2006 Jeep Commander can often be done right at home, saving you time and money. This guide will walk you through the process, making it easy to program your key fob yourself.
Before you begin, please ensure you have two working keys that currently start your vehicle. This is crucial for the onboard programming method to work. If you only have one working key, or none, you will need to visit a professional locksmith or dealership for programming.
Programming Your 2006 Jeep Commander Key Fob
Follow these straightforward steps to program your new key fob:
-
Prepare the New Key: First, have your new key cut to match your existing Jeep Commander keys. This step is essential for the key to function in the ignition.
-
Insert and Turn First Valid Key: Insert your first working key into the ignition switch. Turn the ignition to the ON position. Make sure to keep it in the ON position for at least three seconds, but do not leave it for longer than 15 seconds. After this time, turn the ignition switch back to the LOCK position and remove the key.
-
Insert and Turn Second Valid Key: Within 15 seconds of removing the first key, insert your second working key into the ignition switch. Turn the ignition switch to the ON position again. Hold it in the ON position for approximately 10 seconds. You will hear a chime sound, and the vehicle security light on your dashboard will begin to flash. Once you hear the chime and see the flashing security light, turn the ignition switch to the LOCK position and remove the second key.
-
Insert the New Blank Key: Now, insert the new, uncut key into the ignition switch. Turn the ignition switch to the ON position within 60 seconds of removing the second working key. After about 10 seconds, you will hear a single chime. The vehicle security light will stop flashing. Shortly after, the security light will turn on again for three seconds and then turn off. This sequence indicates that the programming process is complete.
-
Test the New Key and Fob: Your new key is now programmed to start your 2006 Jeep Commander. The Remote Keyless Entry Transmitter (key fob) functions should also be programmed at this point. Test both the key’s ability to start the engine and the remote functions (lock, unlock, panic) to ensure everything is working correctly.
-
Program Additional Keys (Optional): If you need to program more keys, you can repeat this entire procedure for up to a total of eight keys.
2006 Jeep Commander Key Fob Programming Instructions
Need Professional Key Fob Programming Assistance?
If you encounter any difficulties programming your key fob, or if you prefer to have a professional handle the programming for you, there are local services available. Simply enter your city or zip code in an online search engine to find qualified key fob programming services near you. A professional can ensure your key fob is programmed correctly and efficiently, especially if you don’t have two working keys to begin with.
